6 material differences · fewer than 12
Tractor oneURSUS 1.002 / 1.0041984–2009No measured PTO figureTractor twoURSUS 1.012 / 1.014from 1984No measured PTO figure
Which should you choose?
Read our verdict on the 1.002 / 1.004 and the 1.012 / 1.014 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 1.002 / 1.004 | 1.012 / 1.014 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 94.7 hp | 94.7 hp | — |
| Engine declared | T.S.-MARTIN Z-8402 | T.S.-MARTIN Z-8002.1 or 8002.12 | differs |
| Displacement declared | 4.56 L | 4.56 L | — |
| Maximum torque declared | 234 lb·ft · 317 N·m | 227 lb·ft · 308 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated hydraulic dry single-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.5 gpm · 32.0 L/min | 11.6 gpm · 44.0 L/min | +38% 1.012 / 1.014 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,716 lb · 3,500 kg | 8,874 lb · 4,025 kg | +15% 1.012 / 1.014 |
| Wheelbase declared | 93.9 in · 2,385 mm | 93.9 in · 2,385 mm | — |
| Length declared | 155.5 in · 3,950 mm | 163.8 in · 4,160 mm | +5% 1.012 / 1.014 |
| Width declared | 81.9–94.1 in · 2,080–2,390 mm | 77.6–93.7 in · 1,970–2,380 mm | differs |
| Ground clearance declared | 13.8 in · 350 mm | 13.6 in · 345 mm | — |
| Turning radius, braked declared | 12.5 ft · 3.81 m | 11.5 ft · 3.52 m | +8% 1.002 / 1.004 |
| Fuel tank declared | 132.1 qt · 125.0 L | 137.4 qt · 130.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
URSUS 1.002 / 1.004 sources
- Source: Traktorenlexikon, “Ursus 1002/1004”
URSUS 1.012 / 1.014 sources
- Source: Traktorenlexikon, “Ursus 1012/1014”