Steyr M 963 (a) or ZETOR 5321/5341 Super?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the M 963 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5321/5341 Super has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The ZETOR 5321/5341 Super suits loader and hydraulic implement work better on this data: 42% (13.0 L/min / 3.4 gpm) more hydraulic flow and 59% (1,487 kg / 3,278 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Steyr M 963 (a) and ZETOR 5321/5341 Super, with the call on each
QuestionM 963 (a)5321/5341 SuperCall
Which puts more power through the PTO shaft?46.4 kW (62.2 hp)Traktorenlexikon, “Steyr M 963”47.1 kW (63.2 hp)Traktorenlexikon, “Zetor 5321/5341”Not comparableNot comparable on power at the PTO shaft: the M 963 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5321/5341 Super has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the M 963 (a) and the 5321/5341 Super.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the M 963 (a) and the 5321/5341 Super.
Which pumps more oil for implements?30.8 L/min (8.1 gpm)Traktorenlexikon, “Steyr M 963”43.8 L/min (11.6 gpm)Traktorenlexikon, “Zetor 5321/5341”AheadThe ZETOR 5321/5341 Super has 42% more hydraulic flow (13.0 L/min / 3.4 gpm) than the Steyr M 963 (a) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,520 kg (5,556 lb)Traktorenlexikon, “Steyr M 963”4,007 kg (8,834 lb)Traktorenlexikon, “Zetor 5321/5341”AheadThe ZETOR 5321/5341 Super has 59% more lift (1,487 kg / 3,278 lb) than the Steyr M 963 (a) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,490 kg (5,490 lb)Traktorenlexikon, “Steyr M 963”3,125 kg (6,889 lb)Traktorenlexikon, “Zetor 5321/5341”Ahead (a fact, not an advantage)The ZETOR 5321/5341 Super is 26% heavier (635 kg / 1,400 lb) than the Steyr M 963 (a) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,400 kg (11,905 lb)Traktorenlexikon, “Zetor 5321/5341”No figureNo call on maximum permissible mass: no figure on record for the M 963 (a).
Which has the wider choice of gears?16 to 32Traktorenlexikon, “Steyr M 963”10 to 20Traktorenlexikon, “Zetor 5321/5341”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the M 963 (a) and the 5321/5341 Super.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr M 963”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Zetor 5321/5341”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Steyr M 963”540/1000 rpmTraktorenlexikon, “Zetor 5321/5341”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Zetor 5321/5341”No figureNo call on PTO independence: not stated for the M 963 (a).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Steyr M 963”2WD / 4WDTraktorenlexikon, “Zetor 5321/5341”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2001–20041997–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The ZETOR 5321/5341 Super has 42% more hydraulic flow (13.0 L/min / 3.4 gpm) than the Steyr M 963 (a) (both pump flow, as stated by the source).
  • The ZETOR 5321/5341 Super has 59% more lift (1,487 kg / 3,278 lb) than the Steyr M 963 (a) (both lift at the hitch ends, as stated by the source).
  • The ZETOR 5321/5341 Super is 26% heavier (635 kg / 1,400 lb) than the Steyr M 963 (a) (both unladen weight, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the M 963 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5321/5341 Super has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources