Steyr CVT 170 or URSUS 1734?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the CVT 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1734 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Steyr CVT 170 suits loader and hydraulic implement work better on this data: 89% (51.5 L/min / 13.6 gpm) more hydraulic flow and 22% (1,534 kg / 3,382 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Steyr CVT 170 and URSUS 1734, with the call on each
QuestionCVT 1701734Call
Which puts more power through the PTO shaft?125.1 kW (167.8 hp)Traktorenlexikon, “Steyr CVT 170”125 kW (168 hp)Traktorenlexikon, “Ursus 1734”Not comparableNot comparable on power at the PTO shaft: the CVT 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1734 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the CVT 170 and the 1734.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the CVT 170 and the 1734.
Which pumps more oil for implements?109.5 L/min (28.9 gpm)Traktorenlexikon, “Steyr CVT 170”58.0 L/min (15.3 gpm)Traktorenlexikon, “Ursus 1734”AheadThe Steyr CVT 170 has 89% more hydraulic flow (51.5 L/min / 13.6 gpm) than the URSUS 1734 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?8,500 kg (18,739 lb)Traktorenlexikon, “Steyr CVT 170”6,966 kg (15,357 lb)Traktorenlexikon, “Ursus 1734”AheadThe Steyr CVT 170 has 22% more lift (1,534 kg / 3,382 lb) than the URSUS 1734 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,270 kg (13,823 lb)Traktorenlexikon, “Steyr CVT 170”5,590 kg (12,324 lb)Traktorenlexikon, “Ursus 1734”Ahead (a fact, not an advantage)The Steyr CVT 170 is 12% heavier (680 kg / 1,499 lb) than the URSUS 1734 (both unladen weight, as stated by the source).
Which may carry more ballast and load?11,000 kg (24,251 lb)Traktorenlexikon, “Steyr CVT 170”—No figureNo call on maximum permissible mass: no figure on record for the 1734.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Steyr CVT 170”12 to 16 forwardTraktorenlexikon, “Ursus 1734”DifferTransmissions differ in kind: the Steyr CVT 170 is stepless (CVT) and the URSUS 1734 has 12 to 16 forward gears — not called.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the CVT 170 and the 1734.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Steyr CVT 170”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Ursus 1734”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Steyr CVT 170”540/1000 rpmTraktorenlexikon, “Ursus 1734”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Steyr CVT 170”independentTraktorenlexikon, “Ursus 1734”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Steyr CVT 170”4WDTraktorenlexikon, “Ursus 1734”; OECD test report 1866, 1999EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2000–20031998–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr CVT 170 has 89% more hydraulic flow (51.5 L/min / 13.6 gpm) than the URSUS 1734 (both pump flow, as stated by the source).
  • The Steyr CVT 170 has 22% more lift (1,534 kg / 3,382 lb) than the URSUS 1734 (both lift at the hitch ends, as stated by the source).
  • The Steyr CVT 170 is 12% heavier (680 kg / 1,499 lb) than the URSUS 1734 (both unladen weight, as stated by the source).
  • Transmissions differ in kind: the Steyr CVT 170 is stepless (CVT) and the URSUS 1734 has 12 to 16 forward gears — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the CVT 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1734 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources