Steyr 948 (a) or WHITE 6045?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 948 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6045 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Steyr 948 (a) and WHITE 6045, with the call on each
Question948 (a)6045Call
Which puts more power through the PTO shaft?35.3 kW (47.3 hp)Traktorenlexikon, “Steyr 948”35.3 kW (47.3 hp)Traktorenlexikon, “AGCO-White 6045”Not comparableNot comparable on power at the PTO shaft: the 948 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6045 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 948 (a) and the 6045.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 948 (a) and the 6045.
Which pumps more oil for implements?—47.4 L/min (12.5 gpm)Traktorenlexikon, “AGCO-White 6045”No figureNo call on hydraulic flow: no figure on record for the 948 (a).
Which lifts more on the three-point hitch?1,820 kg (4,012 lb)Traktorenlexikon, “Steyr 948”1,737 kg (3,829 lb)Traktorenlexikon, “White 6045”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,310 kg (5,093 lb)Traktorenlexikon, “Steyr 948”2,049 kg (4,517 lb)Traktorenlexikon, “AGCO-White 6045”Ahead (a fact, not an advantage)The Steyr 948 (a) is 13% heavier (261 kg / 575 lb) than the WHITE 6045 (both unladen weight, as stated by the source).
Which may carry more ballast and load?3,500 kg (7,716 lb)Traktorenlexikon, “Steyr 948”—No figureNo call on maximum permissible mass: no figure on record for the 6045.
Which has the wider choice of gears?16Traktorenlexikon, “Steyr 948”12 to 16Traktorenlexikon, “AGCO-White 6045”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 948 (a) and the 6045.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 948”30 km/h (18.6 mph)Traktorenlexikon, “AGCO-White 6045”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Steyr 948”540 rpmTraktorenlexikon, “AGCO-White 6045”AheadThe Steyr 948 (a) offers 1000 rpm at the PTO, which the WHITE 6045 does not (as stated by the sources).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “White 6045”No figureNo call on PTO independence: not stated for the 948 (a).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Steyr 948”Two-wheel or four-wheel driveTraktorenlexikon, “White 6045”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–19961996–1999EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 948 (a) is 13% heavier (261 kg / 575 lb) than the WHITE 6045 (both unladen weight, as stated by the source).
  • The Steyr 948 (a) offers 1000 rpm at the PTO, which the WHITE 6045 does not (as stated by the sources).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 948 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6045 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources