Steyr 948 (a) vs VALMET 4100

11 material differences · fewer than 12

Tractor one

1992–1996

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 948 (a) and the 4100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Steyr 948 (a) and VALMET 4100, field by field
Field	948 (a)	4100	Gap
Engine
Engine power, claimed claimed	47.3 hp	52 hp	+10% 4100
Engine declared	Steyr WD 308.85	VALMET 320 D	differs
Displacement declared	2.36 L	3.30 L	+40% 4100
Maximum torque declared	108 lb·ft · 147 N·m	144 lb·ft · 195 N·m	+33% 4100
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	10.3 gpm · 39.0 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	4,012 lb · 1,820 kg	6,294 lb · 2,855 kg	+57% 4100
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,093 lb · 2,310 kg	5,864 lb · 2,660 kg	+15% 4100
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	83.1 in · 2,112 mm	+7% 4100
Length declared	129.5 in · 3,290 mm	149.2 in · 3,790 mm	+15% 4100
Width declared	68.5 in · 1,740 mm	68.0 in · 1,728 mm	—
Height declared	90.2 in · 2,290 mm	92.5 in · 2,350 mm	—
Ground clearance declared	17.5 in · 445 mm	16.7 in · 425 mm	—
Turning radius, braked declared	10.5 ft · 3.19 m	12.8 ft · 3.90 m	+22% 4100
Fuel tank declared	56.0 qt · 53.0 L	100.4 qt · 95.0 L	+79% 4100

Source

Source