Steyr 9078 (a) vs VALMET 865-2/865

11 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1996–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 9078 (a) and the 865-2/865 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Steyr 9078 (a) and VALMET 865-2/865, field by field
Field	9078 (a)	865-2/865	Gap
Engine
Engine power, claimed claimed	77.0 hp	86 hp	+11% 865-2/865
Engine declared	Steyr-MWM WD 401.81	VALMET 420 DSR	differs
Displacement declared	4.16 L	3.30 L	+26% 9078 (a)
Maximum torque declared	215 lb·ft · 292 N·m	229 lb·ft · 310 N·m	+6% 865-2/865
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	13.3 gpm · 50.5 L/min	15.1 gpm · 57.0 L/min	+13% 865-2/865
Pressure declared	2,147 psi · 148 bar	2,901 psi · 200 bar	+35% 865-2/865
Three-point lift at ends declared	10,031 lb · 4,550 kg	7,419 lb · 3,365 kg	+35% 9078 (a)
Rear PTO speeds declared	390/540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,430 lb · 3,370 kg	7,033 lb · 3,190 kg	+6% 9078 (a)
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	95.3 in · 2,420 mm	88.3 in · 2,244 mm	+8% 9078 (a)
Length declared	158.5 in · 4,025 mm	151.3 in · 3,842 mm	—
Width declared	73.7 in · 1,873 mm	80.3 in · 2,040 mm	+9% 865-2/865
Height declared	104.7 in · 2,660 mm	102.8 in · 2,610 mm	—
Ground clearance declared	—	18.3 in · 465 mm	—
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	105.7 qt · 100.0 L	77.1 qt · 73.0 L	+37% 9078 (a)

Source

Source