Steyr 8070 (a) vs UTB Universal 600

10 material differences · fewer than 12

Tractor one

1979–1992

No measured PTO figure

Tractor two

from 1974

No measured PTO figure

Which should you choose?

Read our verdict on the 8070 (a) and the Universal 600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Steyr 8070 (a) and UTB Universal 600, field by field
Field	8070 (a)	Universal 600	Gap
Engine
Engine power, claimed claimed	57.3 hp	57.3 hp	—
Engine declared	Steyr WD-411.42 or WD-411.41	UTB D-121 A	differs
Displacement declared	3.46 L	3.12 L	+11% 8070 (a)
Maximum torque declared	—	134 lb·ft · 182 N·m	—
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch or LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	—	5.8 gpm · 21.8 L/min	—
Pressure declared	3,553 psi · 245 bar	1,856 psi · 128 bar	+91% 8070 (a)
Three-point lift at ends declared	5,732 lb · 2,600 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,703 lb · 2,587 kg	4,519 lb · 2,050 kg	+26% 8070 (a)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	84.8 in · 2,155 mm	81.1 in · 2,060 mm	—
Length declared	146.3 in · 3,716 mm	135.0 in · 3,430 mm	+8% 8070 (a)
Width declared	67.3 in · 1,710 mm	59.8 in · 1,520 mm	+13% 8070 (a)
Height declared	95.1 in · 2,416 mm	98.0 in · 2,490 mm	—
Ground clearance declared	14.8 in · 375 mm	18.5 in · 470 mm	+25% Universal 600
Turning radius, braked declared	11.4 ft · 3.48 m	11.2 ft · 3.40 m	—
Fuel tank declared	101.4 qt · 96.0 L	57.1 qt · 54.0 L	+78% 8070 (a)

Source

Source