Steyr 8060 (a) or ZETOR 4511?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 8060 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4511 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Steyr 8060 (a) suits loader and hydraulic implement work better on this data: 21% (4.1 L/min / 1.1 gpm) more hydraulic flow and 57% (800 kg / 1,764 lb) more three-point lift.
- The Steyr 8060 (a) suits heavy draft work (ploughing, cultivating) better on this data: 20% (410 kg / 904 lb) heavier and four-wheel drive.
- The Steyr 8060 (a) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 8060 (a) | 4511 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 35.3 kW (47.3 hp)Traktorenlexikon, “Steyr 8060” | 35.3 kW (47.3 hp)Traktorenlexikon, “Zetor 4511” | Not comparableNot comparable on power at the PTO shaft: the 8060 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4511 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 8060 (a) and the 4511. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 8060 (a) and the 4511. |
| Which pumps more oil for implements? | 24.1 L/min (6.4 gpm)Traktorenlexikon, “Steyr 8060” | 20.0 L/min (5.3 gpm)Traktorenlexikon, “Zetor 4511” | AheadThe Steyr 8060 (a) has 21% more hydraulic flow (4.1 L/min / 1.1 gpm) than the ZETOR 4511 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,200 kg (4,850 lb)Traktorenlexikon, “Steyr 8060” | 1,400 kg (3,086 lb)Traktorenlexikon, “Zetor 4511” | AheadThe Steyr 8060 (a) has 57% more lift (800 kg / 1,764 lb) than the ZETOR 4511 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,420 kg (5,335 lb)Traktorenlexikon, “Steyr 8060” | 2,010 kg (4,431 lb)Traktorenlexikon, “Zetor 4511” | Ahead (a fact, not an advantage)The Steyr 8060 (a) is 20% heavier (410 kg / 904 lb) than the ZETOR 4511 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 8060 (a) and the 4511. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Steyr 8060” | 10Traktorenlexikon, “Zetor 4511” | AheadThe Steyr 8060 (a) has 60% more forward gears (6 gears) than the ZETOR 4511 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 8060 (a) and the 4511. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 8060” | 25 km/h (15.5 mph)Traktorenlexikon, “Zetor 4511” | AheadThe Steyr 8060 (a) has 20% more top speed (5.0 km/h / 3.1 mph) than the ZETOR 4511 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Steyr 8060” | 540 rpmTraktorenlexikon, “Zetor 4511” | AheadThe Steyr 8060 (a) offers 1000 rpm at the PTO, which the ZETOR 4511 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Zetor 4511” | No figureNo call on PTO independence: not stated for the 8060 (a). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Steyr 8060” | 2WDTraktorenlexikon, “Zetor 4511” | AheadThe Steyr 8060 (a) is available with four-wheel drive; the ZETOR 4511 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1979–1992 | 1968–1972 | Ahead (a fact, not an advantage)The Steyr 8060 (a) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Steyr 8060 (a) has 21% more hydraulic flow (4.1 L/min / 1.1 gpm) than the ZETOR 4511 (both pump flow, as stated by the source).
- The Steyr 8060 (a) has 57% more lift (800 kg / 1,764 lb) than the ZETOR 4511 (both lift at the hitch ends, as stated by the source).
- The Steyr 8060 (a) is 20% heavier (410 kg / 904 lb) than the ZETOR 4511 (both unladen weight, as stated by the source).
- The Steyr 8060 (a) has 60% more forward gears (6 gears) than the ZETOR 4511 (both forward gears, as stated by the source).
- The Steyr 8060 (a) has 20% more top speed (5.0 km/h / 3.1 mph) than the ZETOR 4511 (both top speed forward, as stated by the source).
- The Steyr 8060 (a) offers 1000 rpm at the PTO, which the ZETOR 4511 does not (as stated by the sources).
- The Steyr 8060 (a) is available with four-wheel drive; the ZETOR 4511 is two-wheel drive (as stated by the sources).
- The Steyr 8060 (a) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 8060 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4511 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources