Steyr 8060 (a) or ZETOR 3320/3340?

Which should you choose?

On performance, every comparable figure that differs favours the ZETOR 3320/3340: hydraulic flow.

  • The ZETOR 3320/3340 suits loader and hydraulic implement work better on this data: 33% (7.9 L/min / 2.1 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Steyr 8060 (a) and ZETOR 3320/3340, with the call on each
Question8060 (a)3320/3340Call
Which puts more power through the PTO shaft?30.8 kW (41.3 hp)Traktorenlexikon, “Steyr 8060”31.2 kW (41.8 hp)Traktorenlexikon, “Zetor 3320/3340”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 8060 (a) and the 3320/3340.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 8060 (a) and the 3320/3340.
Which pumps more oil for implements?24.1 L/min (6.4 gpm)Traktorenlexikon, “Steyr 8060”32.0 L/min (8.5 gpm)Traktorenlexikon, “Zetor 3320/3340”AheadThe ZETOR 3320/3340 has 33% more hydraulic flow (7.9 L/min / 2.1 gpm) than the Steyr 8060 (a) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,200 kg (4,850 lb)Traktorenlexikon, “Steyr 8060”No figureNo call on three-point lift: no figure on record for the 3320/3340.
Which is heavier, for traction?2,420 kg (5,335 lb)Traktorenlexikon, “Steyr 8060”2,895 kg (6,382 lb)Traktorenlexikon, “Zetor 3320/3340”Ahead (a fact, not an advantage)The ZETOR 3320/3340 is 20% heavier (475 kg / 1,047 lb) than the Steyr 8060 (a) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 8060 (a) and the 3320/3340.
Which has the wider choice of gears?16Traktorenlexikon, “Steyr 8060”10 to 20Traktorenlexikon, “Zetor 3320/3340”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 8060 (a) and the 3320/3340.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 8060”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Zetor 3320/3340”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Steyr 8060”540/1000 rpmTraktorenlexikon, “Zetor 3320/3340”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 8060 (a) and the 3320/3340.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Steyr 8060”2WD / 4WDTraktorenlexikon, “Zetor 3320/3340”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19921993–1997Ahead (a fact, not an advantage)The ZETOR 3320/3340 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The ZETOR 3320/3340 has 33% more hydraulic flow (7.9 L/min / 2.1 gpm) than the Steyr 8060 (a) (both pump flow, as stated by the source).
  • The ZETOR 3320/3340 is 20% heavier (475 kg / 1,047 lb) than the Steyr 8060 (a) (both unladen weight, as stated by the source).
  • The ZETOR 3320/3340 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources