4 material differences · fewer than 12
Tractor oneSteyr 4110 Expertfrom 2019No measured PTO figureTractor twoZETOR 11441 (2007-2009)2007–2009No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2019–2019; 2007–2009). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
4 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 4110 Expert | 11441 (2007-2009) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 109 hp | 108.5 hp | — |
| Engine declared | — | Zetor Z-1405 (Tier-III) | — |
| Displacement declared | — | 4.16 L | — |
| Maximum torque declared | — | 354 lb·ft · 480 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | — | Pedal-operated dry Zetor single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 29.1 gpm · 110 L/min | 18.4 gpm · 69.6 L/min | +58% 4110 Expert |
| Pressure declared | 2,901 psi · 200 bar | 1,813 psi · 125 bar | +60% 4110 Expert |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,125 lb · 5,500 kg | 10,274 lb · 4,660 kg | +18% 4110 Expert |
| Maximum permissible mass declared | — | 17,637 lb · 8,000 kg | — |
| Wheelbase declared | 98.0 in · 2,490 mm | 94.4 in · 2,397 mm | — |
| Length declared | 188.3 in · 4,784 mm | 183.9 in · 4,670 mm | — |
| Width declared | 87.7 in · 2,228 mm | 85.2–88.0 in · 2,165–2,235 mm | — |
| Ground clearance declared | — | 17.9 in · 455 mm | — |
| Fuel tank declared | — | 190.2 qt · 180.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Steyr 4110 Expert sources
- Source: Traktorenlexikon, “Steyr 4110 Expert”
ZETOR 11441 (2007-2009) sources
- Source: Traktorenlexikon, “Zetor 11441 (2007-2009)”