SOMECA 900 (TD) vs VALMET 702 S (A)

11 material differences · fewer than 12

Tractor one

1968–1971

No measured PTO figure

Tractor two

1974–1979

No measured PTO figure

Which should you choose?

Read our verdict on the 900 (TD) and the 702 S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

SOMECA 900 (TD) and VALMET 702 S (A), field by field
Field	900 (TD)	702 S (A)	Gap
Engine
Engine power, claimed claimed	88.8 hp	89.7 hp	—
Engine declared	FIAT 8065.01.000	VALMET 411 BS	differs
Displacement declared	4.68 L	4.18 L	+12% 900 (TD)
Maximum torque declared	203 lb·ft · 275 N·m	235 lb·ft · 319 N·m	+16% 702 S (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 702 S (A)
Hydraulics & hitch
Pump flow declared	11.5 gpm · 43.5 L/min	—	—
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	4,982 lb · 2,260 kg	5,456 lb · 2,475 kg	+10% 702 S (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,363 lb · 3,340 kg	7,551 lb · 3,425 kg	—
Wheelbase declared	97.6 in · 2,480 mm	88.2 in · 2,240 mm	+11% 900 (TD)
Length declared	164.2 in · 4,170 mm	150.4 in · 3,820 mm	+9% 900 (TD)
Width declared	78.7 in · 1,998 mm	73.6 in · 1,869 mm	+7% 900 (TD)
Height declared	93.1 in · 2,365 mm	99.0 in · 2,515 mm	+6% 702 S (A)
Ground clearance declared	17.4 in · 442 mm	17.7 in · 450 mm	—
Turning radius, braked declared	12.5 ft · 3.81 m	12.4 ft · 3.79 m	—
Fuel tank declared	122.6 qt · 116.0 L	71.9 qt · 68.0 L	+71% 900 (TD)

Source

Source