10 material differences · fewer than 12
Tractor oneSOMECA 715 (DT)1966–1967No measured PTO figureTractor twoWHITE 2-601976–1980No measured PTO figure
Which should you choose?
Read our verdict on the 715 (DT) and the 2-60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 715 (DT) | 2-60 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.1 hp | — |
| Engine declared | O.M.-FIAT CO-2 D/70 | FIAT-IVECO 8045.02.200 | differs |
| Displacement declared | — | 3.46 L | — |
| Maximum torque declared | 192 lb·ft · 260 N·m | 147 lb·ft · 199 N·m | +31% 715 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 2-60 |
| Clutch declared | Pedal-operated two-stage dry FERODO double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.0 gpm · 26.5 L/min | 5.8 gpm · 21.8 L/min | +22% 715 (DT) |
| Pressure declared | 2,843 psi · 196 bar | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,349 lb · 2,880 kg | 5,161 lb · 2,341 kg | +23% 715 (DT) |
| Wheelbase declared | 86.6 in · 2,200 mm | 81.3 in · 2,065 mm | +7% 715 (DT) |
| Length declared | 149.6 in · 3,800 mm | 126.0 in · 3,200 mm | +19% 715 (DT) |
| Width declared | 70.9 in · 1,800 mm | 72.8 in · 1,850 mm | — |
| Ground clearance declared | 18.3 in · 465 mm | 20.0 in · 508 mm | +9% 2-60 |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 11.2 ft · 3.40 m | +12% 715 (DT) |
| Fuel tank declared | 88.8 qt · 84.0 L | 57.1 qt · 54.0 L | +56% 715 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA 715 (DT) sources
- Source: Traktorenlexikon, “Someca 715”
- Source: Traktorenlexikon, “Fiat 715/715 DT”
WHITE 2-60 sources
- Source: Traktorenlexikon, “White 2-60”
- Source: Traktorenlexikon, “Someca 600”