6 material differences · fewer than 12
Tractor oneSOMECA 600 (TD)1971–1973No measured PTO figureTractor twoWHITE 13651971–1975No measured PTO figure
Which should you choose?
Read our verdict on the 600 (TD) and the 1365 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 600 (TD) | 1365 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 55.3 hp | +7% 600 (TD) |
| Engine declared | FIAT-IVECO 8045.02.200 | FIAT-IVECO 8045.02.200 | — |
| Displacement declared | 3.46 L | 3.46 L | — |
| Maximum torque declared | 147 lb·ft · 199 N·m | 147 lb·ft · 199 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated two stage dry Ferodo double clutch | Dry Ferodo double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,663 lb · 2,115 kg | 4,960 lb · 2,250 kg | +6% 1365 |
| Wheelbase declared | 81.5 in · 2,070 mm | 81.5 in · 2,070 mm | — |
| Length declared | 135.0 in · 3,430 mm | 122.0 in · 3,099 mm | +11% 600 (TD) |
| Width declared | 70.9–95.3 in · 1,800–2,420 mm | 70.0 in · 1,778 mm | differs |
| Ground clearance declared | 17.6 in · 447 mm | 18.8 in · 478 mm | +7% 1365 |
| Turning radius, braked declared | 11.2 ft · 3.42 m | 10.3 ft · 3.13 m | +9% 600 (TD) |
| Fuel tank declared | 57.1 qt · 54.0 L | 57.1 qt · 54.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA 600 (TD) sources
- Source: Traktorenlexikon, “Someca 600”
WHITE 1365 sources
- Source: Traktorenlexikon, “White 1370”
- Source: Traktorenlexikon, “Someca 600”