SOMECA 550 (DT) or SOMECA 615 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 550 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 615 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SOMECA 550 (DT) and SOMECA 615 (DT), with the call on each
Question550 (DT)615 (DT)Call
Which puts more power through the PTO shaft?38.2 kW (51.2 hp)Traktorenlexikon, “Someca 550”38.2 kW (51.2 hp)Traktorenlexikon, “Someca 615”Not comparableNot comparable on power at the PTO shaft: the 550 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 615 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 550 (DT) and the 615 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 550 (DT) and the 615 (DT).
Which pumps more oil for implements?21.8 L/min (5.8 gpm)Traktorenlexikon, “Someca 550”20.8 L/min (5.5 gpm)Traktorenlexikon, “Someca 615”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?1,450 kg (3,197 lb)Traktorenlexikon, “Someca 550”2,080 kg (4,586 lb)Traktorenlexikon, “Someca 615”Not comparableNot comparable on three-point lift: the 550 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 550”); the 615 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 615”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,060 kg (4,542 lb)Traktorenlexikon, “Someca 550”2,640 kg (5,820 lb)Traktorenlexikon, “Someca 615”Ahead (a fact, not an advantage)The SOMECA 615 (DT) is 28% heavier (580 kg / 1,279 lb) than the SOMECA 550 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 550 (DT) and the 615 (DT).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Someca 550”7Traktorenlexikon, “Someca 615”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 550 (DT) and the 615 (DT).
Which is faster on the road?24 km/h (14.9 mph)Traktorenlexikon, “Someca 550”22 km/h (13.7 mph)Traktorenlexikon, “Someca 615”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Someca 550”540 rpmTraktorenlexikon, “Someca 615”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Someca 615”No figureNo call on PTO independence: not stated for the 550 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Someca 550”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 615”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1968–19711965–1968EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SOMECA 615 (DT) is 28% heavier (580 kg / 1,279 lb) than the SOMECA 550 (DT) (both unladen weight, as stated by the source).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 550 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 615 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 550 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 550”); the 615 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 615”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources