SOMECA 400 (DT) vs SOMECA 400 V/E
3 material differences · fewer than 12
Which should you choose?
Read our verdict on the 400 (DT) and the 400 V/E → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
3 material differences · 13 fields identical or within 5%, which is not counted as material
| Field | 400 (DT) | 400 V/E | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34 hp | 34 hp | — |
| Engine declared | O.M.-FIAT 8035.01.201 | O.M.-FIAT 8035.01.201 | — |
| Displacement declared | 2.34 L | 2.34 L | — |
| Maximum torque declared | 103 lb·ft · 140 N·m | 103 lb·ft · 140 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal-operated two-stage dry FEREDO double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | 2,843 psi · 196 bar | — |
| Three-point lift at ends declared | 2,866 lb · 1,300 kg | 2,866 lb · 1,300 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,748 lb · 1,700 kg | 3,549 lb · 1,610 kg | +6% 400 (DT) |
| Wheelbase declared | 75.6 in · 1,920 mm | 74.2 in · 1,885 mm | — |
| Length declared | 126.0 in · 3,200 mm | 127.2 in · 3,230 mm | — |
| Width declared | 62.4 in · 1,585 mm | 38.6–43.3 in · 980–1,100 mm | differs |
| Height declared | 67.5 in · 1,715 mm | 69.7 in · 1,770 mm | — |
| Ground clearance declared | 14.6 in · 370 mm | 13.4 in · 340 mm | +9% 400 (DT) |
| Turning radius, braked declared | 9.7 ft · 2.95 m | — | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 57.1 qt · 54.0 L | — |
SOMECA 400 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 400”
SOMECA 400 V/E sources
Source
- Source: Traktorenlexikon, “Someca 400 V/E”
- Source: Traktorenlexikon, “Someca 400”