SOMECA 350 (TD) or URSUS C-335?

Which should you choose?

The figures split: the URSUS C-335 is ahead on hydraulic flow; the SOMECA 350 (TD) is ahead on three-point lift and drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SOMECA 350 (TD) and URSUS C-335, with the call on each
Question350 (TD)C-335Call
Which puts more power through the PTO shaft?21.7 kW (29.1 hp)Traktorenlexikon, “Someca 350”21.3 kW (28.6 hp)Traktorenlexikon, “Ursus C-335”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 350 (TD) and the C-335.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 350 (TD) and the C-335.
Which pumps more oil for implements?14.4 L/min (3.8 gpm)Traktorenlexikon, “Someca 350”18.0 L/min (4.8 gpm)Traktorenlexikon, “Ursus C-335”AheadThe URSUS C-335 has 25% more hydraulic flow (3.6 L/min / 1.0 gpm) than the SOMECA 350 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?775 kg (1,709 lb)Traktorenlexikon, “Someca 350”700 kg (1,543 lb)Traktorenlexikon, “Ursus C-335”AheadThe SOMECA 350 (TD) has 11% more lift (75 kg / 165 lb) than the URSUS C-335 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,415 kg (3,120 lb)Traktorenlexikon, “Someca 350”1,780 kg (3,924 lb)Traktorenlexikon, “Ursus C-335”Ahead (a fact, not an advantage)The URSUS C-335 is 26% heavier (365 kg / 805 lb) than the SOMECA 350 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 350 (TD) and the C-335.
Which has the wider choice of gears?6Traktorenlexikon, “Someca 350”6Wikipedia (pl): Ursus C-335 (open data)EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 350 (TD) and the C-335.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Someca 350”24 km/h (14.9 mph)Traktorenlexikon, “Ursus C-335”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Someca 350”540 rpmTraktorenlexikon, “Ursus C-335”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 350 (TD) and the C-335.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Someca 350”2WDTraktorenlexikon, “Ursus C-335”AheadThe SOMECA 350 (TD) is available with four-wheel drive; the URSUS C-335 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1971–19761967–1987EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The URSUS C-335 has 25% more hydraulic flow (3.6 L/min / 1.0 gpm) than the SOMECA 350 (TD) (both pump flow, as stated by the source).
  • The SOMECA 350 (TD) has 11% more lift (75 kg / 165 lb) than the URSUS C-335 (both lift at the hitch ends, as stated by the source).
  • The URSUS C-335 is 26% heavier (365 kg / 805 lb) than the SOMECA 350 (TD) (both unladen weight, as stated by the source).
  • The SOMECA 350 (TD) is available with four-wheel drive; the URSUS C-335 is two-wheel drive (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources