8 material differences · fewer than 12
Tractor oneSOMECA 3151965–1968No measured PTO figureTractor twoZETOR 3011/30451960–1967No measured PTO figure
Which should you choose?
Read our verdict on the 315 and the 3011/3045 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 315 | 3011/3045 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 32.6 hp | 32.6 hp | — |
| Engine declared | O.M.-FIAT 605 D 015 | ZETOR Z-3001 | differs |
| Displacement declared | 1.90 L | 2.34 L | +23% 3011/3045 |
| Maximum torque declared | 80 lb·ft · 108 N·m | 94 lb·ft · 128 N·m | +19% 3011/3045 |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.4 gpm · 16.5 L/min | 6.1 gpm · 23.0 L/min | +39% 3011/3045 |
| Pressure declared | 2,843 psi · 196 bar | 1,707 psi · 118 bar | +66% 315 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,395 lb · 1,540 kg | 3,263 lb · 1,480 kg | — |
| Wheelbase declared | 75.8 in · 1,925 mm | 75.5 in · 1,918 mm | — |
| Length declared | 118.7 in · 3,015 mm | 118.7 in · 3,016 mm | — |
| Width declared | 64.0–88.6 in · 1,625–2,250 mm | 65.0 in · 1,652 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 15.7 in · 400 mm | — |
| Turning radius, braked declared | 11.0 ft · 3.35 m | 9.9 ft · 3.01 m | +11% 315 |
| Fuel tank declared | 51.8 qt · 49.0 L | 43.3 qt · 41.0 L | +20% 315 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA 315 sources
- Source: Traktorenlexikon, “Someca 315”
- Source: Traktorenlexikon, “Someca SOM 30 B”
ZETOR 3011/3045 sources
- Source: Traktorenlexikon, “Zetor 3011”
- Source: Traktorenlexikon, “Zetor 3511”