SOMECA 1000 Super (TD) or SOMECA 980 (TD)?

Which should you choose?

On performance, every comparable figure that differs favours the SOMECA 1000 Super (TD): hydraulic flow.

  • The SOMECA 1000 Super (TD) suits loader and hydraulic implement work better on this data: 24% (7.7 L/min / 2.0 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SOMECA 1000 Super (TD) and SOMECA 980 (TD), with the call on each
Question1000 Super (TD)980 (TD)Call
Which puts more power through the PTO shaft?67.7 kW (90.7 hp)Traktorenlexikon, “Someca 1000 S”68.0 kW (91.1 hp)Traktorenlexikon, “Someca 980”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 1000 Super (TD) and the 980 (TD).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 1000 Super (TD) and the 980 (TD).
Which pumps more oil for implements?39.5 L/min (10.4 gpm)Traktorenlexikon, “Someca 1000 S”31.8 L/min (8.4 gpm)Traktorenlexikon, “Someca 980”AheadThe SOMECA 1000 Super (TD) has 24% more hydraulic flow (7.7 L/min / 2.0 gpm) than the SOMECA 980 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,200 kg (7,055 lb)Traktorenlexikon, “Someca 1000 S”3,350 kg (7,385 lb)Traktorenlexikon, “Someca 980”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,620 kg (7,981 lb)Traktorenlexikon, “Someca 1000 S”3,774 kg (8,320 lb)Traktorenlexikon, “Someca 980”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 1000 Super (TD) and the 980 (TD).
Which has the wider choice of gears?12 to 16Traktorenlexikon, “Someca 1000 S”12 to 16Traktorenlexikon, “Someca 980”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 1000 Super (TD) and the 980 (TD).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Someca 1000 S”25 km/h (15.5 mph)Traktorenlexikon, “Someca 980”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Someca 1000 S”540/1000 rpmTraktorenlexikon, “Someca 980”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Someca 1000 S”independentTraktorenlexikon, “Someca 980”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Someca 1000 S”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 980”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1976–19791979–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SOMECA 1000 Super (TD) has 24% more hydraulic flow (7.7 L/min / 2.0 gpm) than the SOMECA 980 (TD) (both pump flow, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources