SAME Silver 90 (DT) or VALMET 900?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Silver 90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 900 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SAME Silver 90 (DT) and VALMET 900, with the call on each
QuestionSilver 90 (DT)900Call
Which puts more power through the PTO shaft?66.2 kW (88.8 hp)Traktorenlexikon, “SAME Silver 90”66.2 kW (88.8 hp)Traktorenlexikon, “Valmet 900/II”Not comparableNot comparable on power at the PTO shaft: the Silver 90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 900 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Silver 90 (DT) and the 900.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Silver 90 (DT) and the 900.
Which pumps more oil for implements?56.1 L/min (14.8 gpm)Traktorenlexikon, “SAME Silver 90”55.7 L/min (14.7 gpm)Traktorenlexikon, “Valmet 900/II”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?3,600 kg (7,937 lb)Traktorenlexikon, “SAME Silver 90”3,365 kg (7,419 lb)Traktorenlexikon, “Valmet 900/II”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,620 kg (7,981 lb)Traktorenlexikon, “SAME Silver 90”3,360 kg (7,408 lb)Traktorenlexikon, “Valmet 900/II”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,000 kg (13,228 lb)Traktorenlexikon, “SAME Silver 90”—No figureNo call on maximum permissible mass: no figure on record for the 900.
Which has the wider choice of gears?15 to 60Traktorenlexikon, “SAME Silver 90”8 to 16Traktorenlexikon, “Valmet 900/II”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Silver 90 (DT) and the 900.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “SAME Silver 90”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 900/II”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000E/1000 rpmTraktorenlexikon, “SAME Silver 90”540E/540 rpmTraktorenlexikon, “Valmet 900/II”AheadThe SAME Silver 90 (DT) offers 1000 rpm at the PTO, which the VALMET 900 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “SAME Silver 90”—No figureNo call on PTO independence: not stated for the 900.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “SAME Silver 90”Two-wheel or four-wheel driveTraktorenlexikon, “Valmet 900/II”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–20041997–2002EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SAME Silver 90 (DT) offers 1000 rpm at the PTO, which the VALMET 900 does not (as stated by the sources).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Silver 90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 900 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources