SAME Silver 80 (DT) or VALMET 4600?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Silver 80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The SAME Silver 80 (DT) suits loader and hydraulic implement work better on this data: 26% (745 kg / 1,642 lb) more three-point lift.
- The SAME Silver 80 (DT) suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Silver 80 (DT) | 4600 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 58.8 kW (78.9 hp)Traktorenlexikon, “SAME Silver 80” | 58.8 kW (78.9 hp)Traktorenlexikon, “Valmet 4600” | Not comparableNot comparable on power at the PTO shaft: the Silver 80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Silver 80 (DT) and the 4600. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Silver 80 (DT) and the 4600. |
| Which pumps more oil for implements? | 39.8 L/min (10.5 gpm)Traktorenlexikon, “SAME Silver 80” | 39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 4600” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 3,600 kg (7,937 lb)Traktorenlexikon, “SAME Silver 80” | 2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 4600” | AheadThe SAME Silver 80 (DT) has 26% more lift (745 kg / 1,642 lb) than the VALMET 4600 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,600 kg (7,937 lb)Traktorenlexikon, “SAME Silver 80” | 3,150 kg (6,945 lb)Traktorenlexikon, “Valmet 4600” | Ahead (a fact, not an advantage)The SAME Silver 80 (DT) is 14% heavier (450 kg / 992 lb) than the VALMET 4600 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “SAME Silver 80” | — | No figureNo call on maximum permissible mass: no figure on record for the 4600. |
| Which has the wider choice of gears? | 15 to 60Traktorenlexikon, “SAME Silver 80” | 8 to 12Traktorenlexikon, “Valmet 4600” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Silver 80 (DT) and the 4600. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “SAME Silver 80” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 4600” | AheadThe SAME Silver 80 (DT) has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4600 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/540E/1000E/1000 rpmTraktorenlexikon, “SAME Silver 80” | 540E/540 rpmTraktorenlexikon, “Valmet 4600” | AheadThe SAME Silver 80 (DT) offers 1000 rpm at the PTO, which the VALMET 4600 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “SAME Silver 80” | independentTraktorenlexikon, “Valmet 4600” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “SAME Silver 80” | 4WDTraktorenlexikon, “Valmet 4600” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 1993–1996 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The SAME Silver 80 (DT) has 26% more lift (745 kg / 1,642 lb) than the VALMET 4600 (both lift at the hitch ends, as stated by the source).
- The SAME Silver 80 (DT) is 14% heavier (450 kg / 992 lb) than the VALMET 4600 (both unladen weight, as stated by the source).
- The SAME Silver 80 (DT) has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4600 (both top speed forward, as stated by the source).
- The SAME Silver 80 (DT) offers 1000 rpm at the PTO, which the VALMET 4600 does not (as stated by the sources).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Silver 80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources