SAME Silver 100.4 DT or VALMET 6550 HiTech?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Silver 100.4 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 6550 HiTech suits loader and hydraulic implement work better on this data: 26% (14.7 L/min / 3.9 gpm) more hydraulic flow.
- The VALMET 6550 HiTech suits road haulage better on this data: 25% (1,500 kg / 3,307 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Silver 100.4 DT | 6550 HiTech | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 73.5 kW (98.6 hp)Traktorenlexikon, “SAME Silver 100.4” | 73.5 kW (98.6 hp)Traktorenlexikon, “Valmet 6550 HiTech” | Not comparableNot comparable on power at the PTO shaft: the Silver 100.4 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Silver 100.4 DT and the 6550 HiTech. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Silver 100.4 DT and the 6550 HiTech. |
| Which pumps more oil for implements? | 56.1 L/min (14.8 gpm)Traktorenlexikon, “SAME Silver 100.4” | 70.8 L/min (18.7 gpm)Traktorenlexikon, “Valmet 6550 HiTech” | AheadThe VALMET 6550 HiTech has 26% more hydraulic flow (14.7 L/min / 3.9 gpm) than the SAME Silver 100.4 DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 5,600 kg (12,346 lb)Traktorenlexikon, “Valmet 6550 HiTech” | No figureNo call on three-point lift: no figure on record for the Silver 100.4 DT. |
| Which is heavier, for traction? | 4,315 kg (9,513 lb)Traktorenlexikon, “SAME Silver 100.4” | 4,720 kg (10,406 lb)Traktorenlexikon, “Valmet 6550 HiTech” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “SAME Silver 100.4” | 7,500 kg (16,535 lb)Traktorenlexikon, “Valmet 6550 HiTech” | AheadThe VALMET 6550 HiTech has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the SAME Silver 100.4 DT (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 15 to 60Traktorenlexikon, “SAME Silver 100.4” | 36Traktorenlexikon, “Valmet 6550 HiTech” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Silver 100.4 DT and the 6550 HiTech. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “SAME Silver 100.4” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6550 HiTech” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/540E/1000E/1000 rpmTraktorenlexikon, “SAME Silver 100.4” | 540/1000 rpmTraktorenlexikon, “Valmet 6550 HiTech” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “SAME Silver 100.4” | independentTraktorenlexikon, “Valmet 6550 HiTech” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “SAME Silver 100.4” | 4WDTraktorenlexikon, “Valmet 6550 HiTech” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 1998–2006 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 6550 HiTech has 26% more hydraulic flow (14.7 L/min / 3.9 gpm) than the SAME Silver 100.4 DT (both pump flow, as stated by the source).
- The VALMET 6550 HiTech has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the SAME Silver 100.4 DT (both maximum permissible mass, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Silver 100.4 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.
← Every figure for both machines, side by side, with sources