SAME Saturno 80 (DT) vs WHITE 2-75
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the Saturno 80 (DT) and the 2-75 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Saturno 80 (DT) | 2-75 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 75.0 hp | — |
| Engine declared | SAME DA 039-1054 L or 1054 P | ISUZU-Motors 6 BB-1 | differs |
| Displacement declared | 4.15 L | 5.39 L | +30% 2-75 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Pedal-operated dry two-stage SAME double clutch | pedal operated dry Daikin single plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Three-point lift at ends declared | 4,806 lb · 2,180 kg | — | — |
| Rear PTO speeds declared | 540 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,085 lb · 2,760 kg | 6,107 lb · 2,770 kg | — |
| Wheelbase declared | 92.5 in · 2,350 mm | 90.6 in · 2,301 mm | — |
| Length declared | 143.7 in · 3,650 mm | 153.5 in · 3,899 mm | +7% 2-75 |
| Width declared | 76.0 in · 1,930 mm | 63.6 in · 1,615 mm | +20% Saturno 80 (DT) |
| Height declared | 96.9 in · 2,460 mm | 100.4 in · 2,550 mm | — |
| Ground clearance declared | 19.7 in · 500 mm | 20.3 in · 516 mm | — |
| Turning radius, braked declared | 11.5 ft · 3.50 m | 10.0 ft · 3.04 m | +15% Saturno 80 (DT) |
| Fuel tank declared | 84.5 qt · 80.0 L | 84.5 qt · 80.0 L | — |
SAME Saturno 80 (DT) sources
Source
- Source: Traktorenlexikon, “SAME Saturno 80 Synchro”
WHITE 2-75 sources
Source
- Source: Traktorenlexikon, “White 2-75”