SAME 35 DT vs UTB U-340 (DTC)

14 material differences

Tractor one

1992–2003

No measured PTO figure

Tractor two

1987–1991

No measured PTO figure

Which should you choose?

Read our verdict on the 35 DT and the U-340 (DTC) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

SAME 35 DT and UTB U-340 (DTC), field by field
Field	35 DT	U-340 (DTC)	Gap
Engine
Engine power, claimed claimed	34.5 hp	34 hp	—
Engine declared	MITSUBISHI K4 F-D	UTB D-111.050	differs
Displacement declared	1.49 L	1.80 L	+21% U-340 (DTC)
Maximum torque declared	63 lb·ft · 84.9 N·m	97 lb·ft · 132 N·m	+55% U-340 (DTC)
Transmission
Top speed declared	15.5 mph · 25 km/h	14.9 mph · 24 km/h	—
Clutch declared	Pedal operated dry single-plate clutch	Dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	7.9 gpm · 30.0 L/min	5.8 gpm · 21.8 L/min	+38% 35 DT
Pressure declared	1,305 psi · 90 bar	—	—
Three-point lift at ends declared	2,646 lb · 1,200 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	2,513 lb · 1,140 kg	3,450 lb · 1,565 kg	+37% U-340 (DTC)
Maximum permissible mass declared	5,291 lb · 2,400 kg	—	—
Wheelbase declared	64.2 in · 1,630 mm	71.1 in · 1,805 mm	+11% U-340 (DTC)
Length declared	116.5 in · 2,960 mm	110.4 in · 2,805 mm	+6% 35 DT
Width declared	48.8 in · 1,240 mm	62.4 in · 1,585 mm	+28% U-340 (DTC)
Height declared	80.1 in · 2,035 mm	58.7 in · 1,491 mm	+36% 35 DT
Ground clearance declared	13.6 in · 345 mm	18.3 in · 465 mm	+35% U-340 (DTC)
Turning radius, braked declared	8.9 ft · 2.71 m	10.0 ft · 3.06 m	+13% U-340 (DTC)
Fuel tank declared	30.6 qt · 29.0 L	57.1 qt · 54.0 L	+86% U-340 (DTC)

Source

Source