SAME Rubin 135 or VALMET 8350?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Rubin 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The SAME Rubin 135 suits loader and hydraulic implement work better on this data: 35% (26.6 L/min / 7.0 gpm) more hydraulic flow and 26% (1,800 kg / 3,968 lb) more three-point lift.
  • The SAME Rubin 135 suits road haulage better on this data: 17% (1,500 kg / 3,307 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SAME Rubin 135 and VALMET 8350, with the call on each
QuestionRubin 1358350Call
Which puts more power through the PTO shaft?99.3 kW (133.2 hp)Traktorenlexikon, “SAME Rubin 135”99.3 kW (133.2 hp)Traktorenlexikon, “Valmet Mega-8350”Not comparableNot comparable on power at the PTO shaft: the Rubin 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Rubin 135 and the 8350.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Rubin 135 and the 8350.
Which pumps more oil for implements?103.0 L/min (27.2 gpm)Traktorenlexikon, “SAME Rubin 135”76.4 L/min (20.2 gpm)Traktorenlexikon, “Valmet Mega-8350”AheadThe SAME Rubin 135 has 35% more hydraulic flow (26.6 L/min / 7.0 gpm) than the VALMET 8350 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?8,600 kg (18,960 lb)Traktorenlexikon, “SAME Rubin 135”6,800 kg (14,991 lb)Traktorenlexikon, “Valmet Mega-8350”AheadThe SAME Rubin 135 has 26% more lift (1,800 kg / 3,968 lb) than the VALMET 8350 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,700 kg (14,771 lb)Traktorenlexikon, “SAME Rubin 135”6,490 kg (14,308 lb)Traktorenlexikon, “Valmet Mega-8350”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?10,500 kg (23,149 lb)Traktorenlexikon, “SAME Rubin 135”9,000 kg (19,842 lb)Traktorenlexikon, “Valmet Mega-8350”AheadThe SAME Rubin 135 has 17% higher maximum permissible mass (1,500 kg / 3,307 lb) than the VALMET 8350 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?18 to 27Traktorenlexikon, “SAME Rubin 135”36Traktorenlexikon, “Valmet Mega-8350”AheadThe VALMET 8350 has 33% more forward gears (9 gears) than the SAME Rubin 135 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Rubin 135 and the 8350.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “SAME Rubin 135”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8350”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “SAME Rubin 135”540/1000 rpmTraktorenlexikon, “Valmet Mega-8350”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “SAME Rubin 135”independentTraktorenlexikon, “Valmet Mega-8350”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “SAME Rubin 135”4WDTraktorenlexikon, “Valmet Mega-8350”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20041998–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SAME Rubin 135 has 35% more hydraulic flow (26.6 L/min / 7.0 gpm) than the VALMET 8350 (both pump flow, as stated by the source).
  • The SAME Rubin 135 has 26% more lift (1,800 kg / 3,968 lb) than the VALMET 8350 (both lift at the hitch ends, as stated by the source).
  • The SAME Rubin 135 has 17% higher maximum permissible mass (1,500 kg / 3,307 lb) than the VALMET 8350 (both maximum permissible mass, as stated by the source).
  • The VALMET 8350 has 33% more forward gears (9 gears) than the SAME Rubin 135 (both forward gears, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Rubin 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources