SAME Mercury 85 Export (DT) or VOLVO-BM-VALMET Volvo 705?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Mercury 85 Export (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Volvo 705 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The VOLVO-BM-VALMET Volvo 705 suits loader and hydraulic implement work better on this data: 17% (7.0 L/min / 1.8 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SAME Mercury 85 Export (DT) and VOLVO-BM-VALMET Volvo 705, with the call on each
QuestionMercury 85 Export (DT)Volvo 705Call
Which puts more power through the PTO shaft?61 kW (82 hp)Traktorenlexikon, “SAME Mercury 85”61 kW (82 hp)Traktorenlexikon, “Volvo 705”Not comparableNot comparable on power at the PTO shaft: the Mercury 85 Export (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Volvo 705 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Mercury 85 Export (DT) and the Volvo 705.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Mercury 85 Export (DT) and the Volvo 705.
Which pumps more oil for implements?41.0 L/min (10.8 gpm)Traktorenlexikon, “SAME Mercury 85”48.0 L/min (12.7 gpm)Traktorenlexikon, “Volvo 705”AheadThe VOLVO-BM-VALMET Volvo 705 has 17% more hydraulic flow (7.0 L/min / 1.8 gpm) than the SAME Mercury 85 Export (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,700 kg (8,157 lb)Traktorenlexikon, “SAME Mercury 85”4,140 kg (9,127 lb)Traktorenlexikon, “Volvo 705”Not comparableNot comparable on three-point lift: the Mercury 85 Export (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Mercury 85”); the Volvo 705: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “Volvo 705”) — not the same quantity, basis and condition.
Which is heavier, for traction?3,270 kg (7,209 lb)Traktorenlexikon, “SAME Mercury 85”3,790 kg (8,356 lb)Traktorenlexikon, “Volvo 705”Ahead (a fact, not an advantage)The VOLVO-BM-VALMET Volvo 705 is 16% heavier (520 kg / 1,146 lb) than the SAME Mercury 85 Export (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the Mercury 85 Export (DT) and the Volvo 705.
Which has the wider choice of gears?12 to 16Traktorenlexikon, “SAME Mercury 85”8 to 16Traktorenlexikon, “Volvo 705”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Mercury 85 Export (DT) and the Volvo 705.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “SAME Mercury 85”30 km/h (18.6 mph)Traktorenlexikon, “Volvo 705”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “SAME Mercury 85”540 rpmTraktorenlexikon, “Volvo 705”AheadThe SAME Mercury 85 Export (DT) offers 1000 rpm at the PTO, which the VOLVO-BM-VALMET Volvo 705 does not (as stated by the sources).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Volvo 705”No figureNo call on PTO independence: not stated for the Mercury 85 Export (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “SAME Mercury 85”Two-wheel or four-wheel driveTraktorenlexikon, “Volvo 705”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1981–19851983–1986EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VOLVO-BM-VALMET Volvo 705 has 17% more hydraulic flow (7.0 L/min / 1.8 gpm) than the SAME Mercury 85 Export (DT) (both pump flow, as stated by the source).
  • The VOLVO-BM-VALMET Volvo 705 is 16% heavier (520 kg / 1,146 lb) than the SAME Mercury 85 Export (DT) (both unladen weight, as stated by the source).
  • The SAME Mercury 85 Export (DT) offers 1000 rpm at the PTO, which the VOLVO-BM-VALMET Volvo 705 does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Mercury 85 Export (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Volvo 705 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the Mercury 85 Export (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Mercury 85”); the Volvo 705: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “Volvo 705”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources