SAME Jaguar 95 (DT) or VALMET 6100-4?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SAME Jaguar 95 (DT) and VALMET 6100-4, with the call on each
QuestionJaguar 95 (DT)6100-4Call
Which puts more power through the PTO shaft?49.2 kW (66.0 hp)Traktorenlexikon, “SAME Jaguar 95”49.0 kW (65.7 hp)Traktorenlexikon, “Valmet 6100”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Jaguar 95 (DT) and the 6100-4.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Jaguar 95 (DT) and the 6100-4.
Which pumps more oil for implements?80.3 L/min (21.2 gpm)Traktorenlexikon, “Valmet 6100”No figureNo call on hydraulic flow: no figure on record for the Jaguar 95 (DT).
Which lifts more on the three-point hitch?4,240 kg (9,348 lb)Traktorenlexikon, “SAME Jaguar 95”4,355 kg (9,601 lb)Traktorenlexikon, “Valmet 6100”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,610 kg (7,959 lb)Traktorenlexikon, “SAME Jaguar 95”4,000 kg (8,818 lb)Traktorenlexikon, “Valmet 6100”Ahead (a fact, not an advantage)The VALMET 6100-4 is 11% heavier (390 kg / 860 lb) than the SAME Jaguar 95 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,300 kg (13,889 lb)Traktorenlexikon, “Valmet 6100”No figureNo call on maximum permissible mass: no figure on record for the Jaguar 95 (DT).
Which has the wider choice of gears?12 to 24Traktorenlexikon, “SAME Jaguar 95”12 to 36Traktorenlexikon, “Valmet 6100”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Jaguar 95 (DT) and the 6100-4.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “SAME Jaguar 95”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6100”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “SAME Jaguar 95”540/1000 rpmTraktorenlexikon, “Valmet 6100”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “SAME Jaguar 95”No figureNo call on PTO independence: not stated for the 6100-4.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “SAME Jaguar 95”4WDTraktorenlexikon, “Valmet 6100”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19821991–1994Ahead (a fact, not an advantage)The VALMET 6100-4 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET 6100-4 is 11% heavier (390 kg / 860 lb) than the SAME Jaguar 95 (DT) (both unladen weight, as stated by the source).
  • The VALMET 6100-4 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources