SAME Golden 65 Compatto or VALMET 4500?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Golden 65 Compatto: power at the PTO, measured by a laboratory at maximum power (OECD Test 1798); the 4500: power at the PTO, claimed (Traktorenlexikon, “Valmet 4500”) — not the same quantity, basis and condition.
- The VALMET 4500 suits loader and hydraulic implement work better on this data: 13% (4.6 L/min / 1.2 gpm) more hydraulic flow.
- The SAME Golden 65 Compatto suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Golden 65 Compatto | 4500 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 46.9 kW (62.9 hp)OECD Test 1798 | 47.0 kW (63.0 hp)Traktorenlexikon, “Valmet 4500” | Not comparableNot comparable on power at the PTO shaft: the Golden 65 Compatto: power at the PTO, measured by a laboratory at maximum power (OECD Test 1798); the 4500: power at the PTO, claimed (Traktorenlexikon, “Valmet 4500”) — not the same quantity, basis and condition. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Golden 65 Compatto and the 4500. |
| Which pulls harder at the drawbar? | 38.8 kW (52.0 hp)OECD Test 1798 | — | No figureNo call on drawbar power: no figure on record for the 4500. |
| Which pumps more oil for implements? | 34.4 L/min (9.1 gpm)Traktorenlexikon, “SAME Golden 65 (DT) Compatto” | 39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 4500” | AheadThe VALMET 4500 has 13% more hydraulic flow (4.6 L/min / 1.2 gpm) than the SAME Golden 65 Compatto (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,999 kg (4,407 lb)Traktorenlexikon, “SAME Golden 65 (DT) Compatto” | 2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 4500” | Not comparableNot comparable on three-point lift: the Golden 65 Compatto: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Golden 65 (DT) Compatto”); the 4500: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 4500”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,200 kg (4,850 lb)Traktorenlexikon, “SAME Golden 65 (DT) Compatto” | 2,820 kg (6,217 lb)Traktorenlexikon, “Valmet 4500” | Ahead (a fact, not an advantage)The VALMET 4500 is 28% heavier (620 kg / 1,367 lb) than the SAME Golden 65 Compatto (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Golden 65 Compatto and the 4500. |
| Which has the wider choice of gears? | 45OECD test report 1798, 1998 | 8 to 12Traktorenlexikon, “Valmet 4500” | AheadThe SAME Golden 65 Compatto has 275% more forward gears (33 gears) than the VALMET 4500 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Golden 65 Compatto and the 4500. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “SAME Golden 65 (DT) Compatto” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 4500” | AheadThe SAME Golden 65 Compatto has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4500 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmOECD test report 1798, 1998 | 540E/540 rpmTraktorenlexikon, “Valmet 4500” | AheadThe SAME Golden 65 Compatto offers 1000 rpm at the PTO, which the VALMET 4500 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 4500” | No figureNo call on PTO independence: not stated for the Golden 65 Compatto. |
| Which drives on both axles? | 4WDOECD test report 1798, 1998; Traktorenlexikon, “SAME Golden 65 (DT) Compatto” | 2WD / 4WDTraktorenlexikon, “Valmet 4500” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2003 | 1993–1996 | Ahead (a fact, not an advantage)The SAME Golden 65 Compatto is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 4500 has 13% more hydraulic flow (4.6 L/min / 1.2 gpm) than the SAME Golden 65 Compatto (both pump flow, as stated by the source).
- The VALMET 4500 is 28% heavier (620 kg / 1,367 lb) than the SAME Golden 65 Compatto (both unladen weight, as stated by the source).
- The SAME Golden 65 Compatto has 275% more forward gears (33 gears) than the VALMET 4500 (both forward gears, as stated by the source).
- The SAME Golden 65 Compatto has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4500 (both top speed forward, as stated by the source).
- The SAME Golden 65 Compatto offers 1000 rpm at the PTO, which the VALMET 4500 does not (as stated by the sources).
- The SAME Golden 65 Compatto is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Golden 65 Compatto: power at the PTO, measured by a laboratory at maximum power (OECD Test 1798); the 4500: power at the PTO, claimed (Traktorenlexikon, “Valmet 4500”) — not the same quantity, basis and condition.
- Not comparable on three-point lift: the Golden 65 Compatto: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Golden 65 (DT) Compatto”); the 4500: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 4500”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources