SAME Golden 60 Compatto (SAME) or VALMET 600?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Golden 60 Compatto has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The VALMET 600 suits loader and hydraulic implement work better on this data: 54% (19.5 L/min / 5.2 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SAME Golden 60 Compatto (SAME) and VALMET 600, with the call on each
QuestionGolden 60 Compatto600Call
Which puts more power through the PTO shaft?44.1 kW (59.1 hp)Traktorenlexikon, “SAME Golden 60 Compatto”44.1 kW (59.1 hp)Traktorenlexikon, “Valmet 600”Not comparableNot comparable on power at the PTO shaft: the Golden 60 Compatto has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Golden 60 Compatto and the 600.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Golden 60 Compatto and the 600.
Which pumps more oil for implements?36.2 L/min (9.6 gpm)Traktorenlexikon, “SAME Golden 60 Compatto”55.7 L/min (14.7 gpm)Traktorenlexikon, “Valmet 600”AheadThe VALMET 600 has 54% more hydraulic flow (19.5 L/min / 5.2 gpm) than the SAME Golden 60 Compatto (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?—2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 600”No figureNo call on three-point lift: no figure on record for the Golden 60 Compatto.
Which is heavier, for traction?2,340 kg (5,159 lb)Traktorenlexikon, “SAME Golden 60 Compatto”3,130 kg (6,900 lb)Traktorenlexikon, “Valmet 600”Ahead (a fact, not an advantage)The VALMET 600 is 34% heavier (790 kg / 1,742 lb) than the SAME Golden 60 Compatto (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the Golden 60 Compatto and the 600.
Which has the wider choice of gears?16 to 30Traktorenlexikon, “SAME Golden 60 Compatto”8 to 16Traktorenlexikon, “Valmet 600”Sources disagreeNo call on forward gears: sources disagree on the figure for the Golden 60 Compatto.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Golden 60 Compatto and the 600.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “SAME Golden 60 Compatto”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 600”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmOECD test report 1813, 1999540E/540 rpmTraktorenlexikon, “Valmet 600”AheadThe SAME Golden 60 Compatto offers 1000 rpm at the PTO, which the VALMET 600 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “SAME Golden 60 Compatto”—No figureNo call on PTO independence: not stated for the 600.
Which drives on both axles?4WDTraktorenlexikon, “SAME Golden 60 Compatto”; OECD test report 1813, 19994WDTraktorenlexikon, “Valmet 600”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20021997–2002EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET 600 has 54% more hydraulic flow (19.5 L/min / 5.2 gpm) than the SAME Golden 60 Compatto (both pump flow, as stated by the source).
  • The VALMET 600 is 34% heavier (790 kg / 1,742 lb) than the SAME Golden 60 Compatto (both unladen weight, as stated by the source).
  • The SAME Golden 60 Compatto offers 1000 rpm at the PTO, which the VALMET 600 does not (as stated by the sources).
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Golden 60 Compatto has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No call on forward gears: sources disagree on the figure for the Golden 60 Compatto.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources