SAME Frutteto 75 II or VALMET 4500?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Frutteto 75 II has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The SAME Frutteto 75 II suits loader and hydraulic implement work better on this data: 41% (16.0 L/min / 4.2 gpm) more hydraulic flow.
  • The SAME Frutteto 75 II suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SAME Frutteto 75 II and VALMET 4500, with the call on each
QuestionFrutteto 75 II4500Call
Which puts more power through the PTO shaft?55.2 kW (74.0 hp)Traktorenlexikon, “SAME Frutteto II 75”55.2 kW (74.0 hp)Traktorenlexikon, “Valmet 4500”Not comparableNot comparable on power at the PTO shaft: the Frutteto 75 II has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Frutteto 75 II and the 4500.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Frutteto 75 II and the 4500.
Which pumps more oil for implements?55.0 L/min (14.5 gpm)Traktorenlexikon, “SAME Frutteto II 75”39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 4500”AheadThe SAME Frutteto 75 II has 41% more hydraulic flow (16.0 L/min / 4.2 gpm) than the VALMET 4500 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,900 kg (6,393 lb)Traktorenlexikon, “SAME Frutteto II 75”2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 4500”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,520 kg (5,556 lb)Traktorenlexikon, “SAME Frutteto II 75”2,820 kg (6,217 lb)Traktorenlexikon, “Valmet 4500”Ahead (a fact, not an advantage)The VALMET 4500 is 12% heavier (300 kg / 661 lb) than the SAME Frutteto 75 II (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the Frutteto 75 II and the 4500.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “SAME Frutteto II 75”8 to 12Traktorenlexikon, “Valmet 4500”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Frutteto 75 II and the 4500.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “SAME Frutteto II 75”30 km/h (18.6 mph)Traktorenlexikon, “Valmet 4500”AheadThe SAME Frutteto 75 II has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4500 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “SAME Frutteto II 75”540E/540 rpmTraktorenlexikon, “Valmet 4500”AheadThe SAME Frutteto 75 II offers 1000 rpm at the PTO, which the VALMET 4500 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “SAME Frutteto II 75”independentTraktorenlexikon, “Valmet 4500”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “SAME Frutteto II 75”Two-wheel or four-wheel driveTraktorenlexikon, “Valmet 4500”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–20051993–1996EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SAME Frutteto 75 II has 41% more hydraulic flow (16.0 L/min / 4.2 gpm) than the VALMET 4500 (both pump flow, as stated by the source).
  • The VALMET 4500 is 12% heavier (300 kg / 661 lb) than the SAME Frutteto 75 II (both unladen weight, as stated by the source).
  • The SAME Frutteto 75 II has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4500 (both top speed forward, as stated by the source).
  • The SAME Frutteto 75 II offers 1000 rpm at the PTO, which the VALMET 4500 does not (as stated by the sources).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Frutteto 75 II has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources