11 material differences · fewer than 12

Tractor oneSAME Explorer 80 (DT)1986–1990No measured PTO figureTractor twoVALMET 655/655-41988–1989No measured PTO figure

Which should you choose?

Read our verdict on the Explorer 80 (DT) and the 655/655-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

SAME Explorer 80 (DT) and VALMET 655/655-4, field by field
Field	Explorer 80 (DT)	655/655-4	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	SAME 1000.4 A 1	VALMET D 44 D-7	differs
Displacement declared	4.00 L	4.40 L	+10% 655/655-4
Maximum torque declared	193 lb·ft · 261 N·m	221 lb·ft · 300 N·m	+15% 655/655-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry SAME single-disc clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	10.7 gpm · 40.5 L/min	—	—
Pressure declared	1,740 psi · 120 bar	—	—
Three-point lift, at the coupling points declared	7,606 lb · 3,450 kg	9,921 lb · 4,500 kg	+30% 655/655-4
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,614 lb · 3,000 kg	8,289 lb · 3,760 kg	+25% 655/655-4
Wheelbase declared	95.1 in · 2,415 mm	93.9 in · 2,385 mm	—
Length declared	145.2 in · 3,687 mm	177.8 in · 4,515 mm	+22% 655/655-4
Width declared	73.6–101.2 in · 1,870–2,570 mm	83.9 in · 2,130 mm	differs
Height, over the cab declared	102.1 in · 2,593 mm	105.1 in · 2,670 mm	—
Ground clearance declared	20.5 in · 520 mm	18.7 in · 475 mm	+9% Explorer 80 (DT)
Turning radius, braked declared	9.6 ft · 2.94 m	—	—
Fuel tank declared	105.7 qt · 100.0 L	190.2 qt · 180.0 L	+80% 655/655-4

Source

Source