SAME Explorer 60 II (DT) or Steyr 658 (a)?

Which should you choose?

On performance, every comparable figure that differs favours the Steyr 658 (a): hydraulic flow. On features, the SAME Explorer 60 II (DT) is ahead on top speed and PTO independence.

  • The SAME Explorer 60 II (DT) suits PTO-driven implements (mowers, balers, pumps) better on this data: an independent PTO.
  • The Steyr 658 (a) suits loader and hydraulic implement work better on this data: 19% (5.5 L/min / 1.5 gpm) more hydraulic flow.
  • The SAME Explorer 60 II (DT) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SAME Explorer 60 II (DT) and Steyr 658 (a), with the call on each
QuestionExplorer 60 II (DT)658 (a)Call
Which puts more power through the PTO shaft?36.6 kW (49.1 hp)Traktorenlexikon, “SAME Explorer II 60”36.4 kW (48.8 hp)Traktorenlexikon, “Steyr 658”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Explorer 60 II (DT) and the 658 (a).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Explorer 60 II (DT) and the 658 (a).
Which pumps more oil for implements?28.5 L/min (7.5 gpm)Traktorenlexikon, “SAME Explorer II 60”34.0 L/min (9.0 gpm)Traktorenlexikon, “Steyr 658”AheadThe Steyr 658 (a) has 19% more hydraulic flow (5.5 L/min / 1.5 gpm) than the SAME Explorer 60 II (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,280 kg (5,027 lb)Traktorenlexikon, “SAME Explorer II 60”2,400 kg (5,291 lb)Traktorenlexikon, “Steyr 658”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,540 kg (5,600 lb)Traktorenlexikon, “SAME Explorer II 60”2,560 kg (5,644 lb)Traktorenlexikon, “Steyr 658”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?4,000 kg (8,818 lb)Traktorenlexikon, “Steyr 658”No figureNo call on maximum permissible mass: no figure on record for the Explorer 60 II (DT).
Which has the wider choice of gears?15 to 20Traktorenlexikon, “SAME Explorer II 60”16Traktorenlexikon, “Steyr 658”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Explorer 60 II (DT) and the 658 (a).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “SAME Explorer II 60”25 km/h (15.5 mph)Traktorenlexikon, “Steyr 658”AheadThe SAME Explorer 60 II (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the Steyr 658 (a) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/540E/1000E/1000 rpmTraktorenlexikon, “SAME Explorer II 60”540/1000 rpmTraktorenlexikon, “Steyr 658”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “SAME Explorer II 60”liveTraktorenlexikon, “Steyr 658”AheadThe SAME Explorer 60 II (DT) has an independent PTO; the Steyr 658 (a)’s is live.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “SAME Explorer II 60”2WD / 4WDTraktorenlexikon, “Steyr 658”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1989–19981977–1979Ahead (a fact, not an advantage)The SAME Explorer 60 II (DT) is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 658 (a) has 19% more hydraulic flow (5.5 L/min / 1.5 gpm) than the SAME Explorer 60 II (DT) (both pump flow, as stated by the source).
  • The SAME Explorer 60 II (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the Steyr 658 (a) (both top speed forward, as stated by the source).
  • The SAME Explorer 60 II (DT) has an independent PTO; the Steyr 658 (a)’s is live.
  • The SAME Explorer 60 II (DT) is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources