SAME Centauro 70 (DT) vs SOMECA 640 (TD)

9 material differences · fewer than 12

Tractor one

1981–1987

No measured PTO figure

Tractor two

1973–1982

No measured PTO figure

Which should you choose?

Read our verdict on the Centauro 70 (DT) and the 640 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

SAME Centauro 70 (DT) and SOMECA 640 (TD), field by field
Field	Centauro 70 (DT)	640 (TD)	Gap
Engine
Engine power, claimed claimed	67 hp	63.2 hp	+6% Centauro 70 (DT)
Engine declared	SAME DA 984 P or DA 1004 P	FIAT-IVECO 8045.02.200/307	differs
Displacement declared	—	3.46 L	—
Maximum torque declared	170 lb·ft · 230 N·m	162 lb·ft · 219 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5 mph · 25 km/h	differs
Hydraulics & hitch
Pump flow declared	11.2 gpm · 42.5 L/min	—	—
Three-point lift at ends declared	8,157 lb · 3,700 kg	4,034 lb · 1,830 kg	+102% Centauro 70 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	4,685 lb · 2,125 kg	+28% Centauro 70 (DT)
Wheelbase declared	92.5 in · 2,350 mm	81.5 in · 2,070 mm	+14% Centauro 70 (DT)
Length declared	151.2 in · 3,840 mm	138.6 in · 3,520 mm	+9% Centauro 70 (DT)
Width declared	76.0 in · 1,930 mm	67.5 in · 1,715 mm	+13% Centauro 70 (DT)
Height declared	94.5 in · 2,400 mm	93.3 in · 2,370 mm	—
Ground clearance declared	16.5 in · 420 mm	17.5 in · 444 mm	+6% 640 (TD)
Turning radius, braked declared	11.5 ft · 3.50 m	11.2 ft · 3.42 m	—
Fuel tank declared	—	57.1 qt · 54.0 L	—

Source

Source