SAME Buffalo 130 (DT) vs VALMET 8100

10 material differences · fewer than 12

Tractor one

1978–1982

No measured PTO figure

Tractor two

1990–1996

No measured PTO figure

Which should you choose?

Read our verdict on the Buffalo 130 (DT) and the 8100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

SAME Buffalo 130 (DT) and VALMET 8100, field by field
Field	Buffalo 130 (DT)	8100	Gap
Engine
Engine power, claimed claimed	122.3 hp	118.4 hp	—
Engine declared	SAME DA 1056 P	VALMET 620 D	differs
Displacement declared	6.23 L	6.59 L	+6% 8100
Maximum torque declared	295 lb·ft · 400 N·m	311 lb·ft · 421 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry BORG & BECK single plate clutch	Pedal-operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	9.2 gpm · 35.0 L/min	17.8 gpm · 67.4 L/min	+93% 8100
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	10,071 lb · 4,568 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,480 lb · 4,300 kg	10,141 lb · 4,600 kg	+7% 8100
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	104.7 in · 2,660 mm	100.7 in · 2,558 mm	—
Length declared	170.1 in · 4,320 mm	186.8 in · 4,745 mm	+10% 8100
Width declared	85.4 in · 2,170 mm	86.6 in · 2,200 mm	—
Height declared	111.4 in · 2,830 mm	108.7 in · 2,760 mm	—
Ground clearance declared	20.9 in · 530 mm	18.7 in · 475 mm	+12% Buffalo 130 (DT)
Turning radius, braked declared	13.5 ft · 4.10 m	15.5 ft · 4.71 m	+15% 8100
Fuel tank declared	147.9 qt · 140.0 L	174.4 qt · 165.0 L	+18% 8100

Source

Source