7 material differences · fewer than 12

Tractor oneSAME Buffalo 130 (DT)1978–1982No measured PTO figureTractor twoSOMECA 1280 (TD)1979–1983No measured PTO figure

Which should you choose?

Read our verdict on the Buffalo 130 (DT) and the 1280 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

SAME Buffalo 130 (DT) and SOMECA 1280 (TD), field by field
Field	Buffalo 130 (DT)	1280 (TD)	Gap
Engine
Engine power, claimed claimed	122.3 hp	121.4 hp	—
Engine declared	SAME DA 1056 P	FIAT-IVECO 8065.24.217 (317)	differs
Displacement declared	6.23 L	5.50 L	+13% Buffalo 130 (DT)
Maximum torque declared	295 lb·ft · 400 N·m	297 lb·ft · 403 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal operated dry BORG & BECK single plate clutch	—	—
Hydraulics & hitch
Pump flow declared	9.2 gpm · 35.0 L/min	—	—
Pressure declared	—	3,263–3,408 psi · 225–235 bar	—
Three-point lift, at the coupling points declared	10,071 lb · 4,568 kg	10,384 lb · 4,710 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,480 lb · 4,300 kg	12,015 lb · 5,450 kg	+27% 1280 (TD)
Wheelbase declared	104.7 in · 2,660 mm	108.3 in · 2,750 mm	—
Length declared	170.1 in · 4,320 mm	164.6 in · 4,182 mm	—
Width declared	85.4–113.0 in · 2,170–2,870 mm	78.7–106.3 in · 2,000–2,700 mm	differs
Height, over the cab declared	111.4 in · 2,830 mm	111.9 in · 2,842 mm	—
Ground clearance declared	20.9 in · 530 mm	19.7 in · 500 mm	+6% Buffalo 130 (DT)
Turning radius, braked declared	13.5 ft · 4.10 m	13.9 ft · 4.25 m	—
Fuel tank declared	147.9 qt · 140.0 L	295.9 qt · 280.0 L	+100% 1280 (TD)

Source

Source