11 material differences · fewer than 12

Tractor oneSAME Antares II 1101996–2000No measured PTO figureTractor twoVALMET Mega 8050 HiTech1998–2004No measured PTO figure

Which should you choose?

Read our verdict on the Antares II 110 and the Mega 8050 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

SAME Antares II 110 and VALMET Mega 8050 HiTech, field by field
Field	Antares II 110	Mega 8050 HiTech	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	SAME 1000.6 A	VALMET 620 DSRE	differs
Displacement declared	6.00 L	6.59 L	+10% Mega 8050 HiTech
Maximum torque declared	278 lb·ft · 377 N·m	340 lb·ft · 461 N·m	+22% Mega 8050 HiTech
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal operated dry single disc clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.5 L/min	18.8 gpm · 71.0 L/min	+23% Mega 8050 HiTech
Pressure declared	2,176 psi · 150 bar	2,901 psi · 200 bar	+33% Mega 8050 HiTech
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,251 lb · 4,650 kg	10,450 lb · 4,740 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	108.3 in · 2,750 mm	100.7 in · 2,558 mm	+8% Antares II 110
Length declared	180.7 in · 4,590 mm	187.3 in · 4,757 mm	—
Width declared	87.4–107.1 in · 2,220–2,720 mm	84.8–104.7 in · 2,155–2,660 mm	—
Height, over the cab declared	110.4 in · 2,805 mm	108.3 in · 2,750 mm	—
Ground clearance declared	17.7 in · 450 mm	18.7 in · 475 mm	+6% Mega 8050 HiTech
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	253.6 qt · 240.0 L	174.4 qt · 165.0 L	+45% Antares II 110

Source

Source