Renault Temis 610 or VALMET 6650 HiTech?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Temis 610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6650 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Renault Temis 610 and VALMET 6650 HiTech, with the call on each
QuestionTemis 6106650 HiTechCall
Which puts more power through the PTO shaft?80.2 kW (107.5 hp)Traktorenlexikon, “Renault Témis 610X/Z”80.9 kW (108.5 hp)Traktorenlexikon, “Valmet 6650 HiTech”Not comparableNot comparable on power at the PTO shaft: the Temis 610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6650 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Temis 610 and the 6650 HiTech.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Temis 610 and the 6650 HiTech.
Which pumps more oil for implements?55.7 L/min (14.7 gpm)Traktorenlexikon, “Renault Témis 610X/Z”70.8 L/min (18.7 gpm)Traktorenlexikon, “Valmet 6650 HiTech”AheadThe VALMET 6650 HiTech has 27% more hydraulic flow (15.1 L/min / 4.0 gpm) than the Renault Temis 610 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?7,260 kg (16,006 lb)Traktorenlexikon, “Renault Témis 610X/Z”5,600 kg (12,346 lb)Traktorenlexikon, “Valmet 6650 HiTech”AheadThe Renault Temis 610 has 30% more lift (1,660 kg / 3,660 lb) than the VALMET 6650 HiTech (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,910 kg (10,825 lb)Traktorenlexikon, “Renault Témis 610X/Z”4,500 kg (9,921 lb)Traktorenlexikon, “Valmet 6650 HiTech”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,000 kg (17,637 lb)Traktorenlexikon, “Renault Témis 610X/Z”7,500 kg (16,535 lb)Traktorenlexikon, “Valmet 6650 HiTech”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?16 to 24Traktorenlexikon, “Renault Témis 610X/Z”36Traktorenlexikon, “Valmet 6650 HiTech”AheadThe VALMET 6650 HiTech has 50% more forward gears (12 gears) than the Renault Temis 610 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Temis 610 and the 6650 HiTech.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Témis 610X/Z”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6650 HiTech”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Renault Témis 610X/Z”540/1000 rpmTraktorenlexikon, “Valmet 6650 HiTech”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Renault Témis 610X/Z”independentTraktorenlexikon, “Valmet 6650 HiTech”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Renault Témis 610X/Z”4WDTraktorenlexikon, “Valmet 6650 HiTech”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1999–20051998–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET 6650 HiTech has 27% more hydraulic flow (15.1 L/min / 4.0 gpm) than the Renault Temis 610 (both pump flow, as stated by the source).
  • The Renault Temis 610 has 30% more lift (1,660 kg / 3,660 lb) than the VALMET 6650 HiTech (both lift at the hitch ends, as stated by the source).
  • The VALMET 6650 HiTech has 50% more forward gears (12 gears) than the Renault Temis 610 (both forward gears, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Temis 610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6650 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources