11 material differences · fewer than 12

Tractor oneRenault Ceres 85 X (A)1994–1998No measured PTO figureTractor twoVALMET 6000-41993–1996No measured PTO figure

Which should you choose?

Read our verdict on the Ceres 85 X (A) and the 6000-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Renault Ceres 85 X (A) and VALMET 6000-4, field by field
Field	Ceres 85 X (A)	6000-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	JOHN DEERE 4045 DRT 35	VALMET 420 D	differs
Displacement declared	4.63 L	4.40 L	—
Maximum torque declared	193 lb·ft · 261 N·m	182 lb·ft · 247 N·m	+6% Ceres 85 X (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch with pedal-operated driving clutch and hand-lever-operated PTO clutch	dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	21.2 gpm · 80.3 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift, at the coupling points declared	8,433 lb · 3,825 kg	9,601 lb · 4,355 kg	+14% 6000-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,672 lb · 3,480 kg	9,193 lb · 4,170 kg	+20% 6000-4
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	97.2 in · 2,470 mm	99.6 in · 2,530 mm	—
Length declared	160.9 in · 4,087 mm	175.2 in · 4,450 mm	+9% 6000-4
Width declared	75.9–87.8 in · 1,929–2,229 mm	85.2 in · 2,165 mm	differs
Height, over the cab declared	100.4 in · 2,550 mm	105.9 in · 2,690 mm	+5% 6000-4
Ground clearance declared	19.3 in · 490 mm	16.9 in · 430 mm	+14% Ceres 85 X (A)
Turning radius, braked declared	12.5 ft · 3.80 m	15.3 ft · 4.65 m	+22% 6000-4
Fuel tank declared	121.5 qt · 115.0 L	167.0 qt · 158.0 L	+37% 6000-4

Source

Source