Renault Ceres 85 (A) or VALMET 6000-4?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Ceres 85 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6000-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 6000-4 suits loader and hydraulic implement work better on this data: 77% (35.0 L/min / 9.2 gpm) more hydraulic flow and 14% (530 kg / 1,168 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Ceres 85 (A) | 6000-4 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 55.2 kW (74.0 hp)Traktorenlexikon, “Renault Ceres 85” | 55.2 kW (74.0 hp)Traktorenlexikon, “Valmet 6000” | Not comparableNot comparable on power at the PTO shaft: the Ceres 85 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6000-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Ceres 85 (A) and the 6000-4. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Ceres 85 (A) and the 6000-4. |
| Which pumps more oil for implements? | 45.3 L/min (12.0 gpm)Traktorenlexikon, “Renault Ceres 85” | 80.3 L/min (21.2 gpm)Traktorenlexikon, “Valmet 6000” | AheadThe VALMET 6000-4 has 77% more hydraulic flow (35.0 L/min / 9.2 gpm) than the Renault Ceres 85 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,825 kg (8,433 lb)Traktorenlexikon, “Renault Ceres 85” | 4,355 kg (9,601 lb)Traktorenlexikon, “Valmet 6000” | AheadThe VALMET 6000-4 has 14% more lift (530 kg / 1,168 lb) than the Renault Ceres 85 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,285 kg (7,242 lb)Traktorenlexikon, “Renault Ceres 85” | 4,170 kg (9,193 lb)Traktorenlexikon, “Valmet 6000” | Ahead (a fact, not an advantage)The VALMET 6000-4 is 27% heavier (885 kg / 1,951 lb) than the Renault Ceres 85 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “Renault Ceres 85” | 6,500 kg (14,330 lb)Traktorenlexikon, “Valmet 6000” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 9 to 10Traktorenlexikon, “Renault Ceres 85” | 12 to 36Traktorenlexikon, “Valmet 6000” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Ceres 85 (A) and the 6000-4. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Ceres 85” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6000” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Renault Ceres 85” | 540/1000 rpmTraktorenlexikon, “Valmet 6000” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Renault Ceres 85” | independentTraktorenlexikon, “Valmet 6000” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Renault Ceres 85” | 4WDTraktorenlexikon, “Valmet 6000” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1995 | 1993–1996 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 6000-4 has 77% more hydraulic flow (35.0 L/min / 9.2 gpm) than the Renault Ceres 85 (A) (both pump flow, as stated by the source).
- The VALMET 6000-4 has 14% more lift (530 kg / 1,168 lb) than the Renault Ceres 85 (A) (both lift at the hitch ends, as stated by the source).
- The VALMET 6000-4 is 27% heavier (885 kg / 1,951 lb) than the Renault Ceres 85 (A) (both unladen weight, as stated by the source).
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Ceres 85 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6000-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources