12 material differences

Tractor oneRenault Ceres 85 (A)1993–1995No measured PTO figureTractor twoVALMET 45001993–1996No measured PTO figure

Which should you choose?

Read our verdict on the Ceres 85 (A) and the 4500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 4 fields identical or within 5%, which is not counted as material

Renault Ceres 85 (A) and VALMET 4500, field by field
FieldCeres 85 (A)4500Gap
Engine
Engine power, claimed claimed74.0 hp74.0 hp—
Engine declaredMWM D 226-4VALMET 320 DSdiffers
Displacement declared4.15 L3.30 L+26% Ceres 85 (A)
Maximum torque declared185 lb·ft · 251 N·m203 lb·ft · 275 N·m+10% 4500
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declaredDry LuK double clutch, pedal-operated driving clutchDry double clutchdiffers
Hydraulics & hitch
Pump flow declared12.0 gpm · 45.3 L/min10.3 gpm · 39.0 L/min+16% Ceres 85 (A)
Pressure declared—2,901 psi · 200 bar—
Three-point lift, at the coupling points declared8,433 lb · 3,825 kg6,294 lb · 2,855 kg+34% Ceres 85 (A)
Rear PTO speeds declared540/1000 rpm540E/540 rpmdiffers
Weight & dimensions
Unladen weight declared7,242 lb · 3,285 kg6,217 lb · 2,820 kg+16% Ceres 85 (A)
Maximum permissible mass declared13,228 lb · 6,000 kg——
Wheelbase declared95.7 in · 2,430 mm83.1 in · 2,112 mm+15% Ceres 85 (A)
Length declared154.7 in · 3,930 mm149.2 in · 3,790 mm—
Width declared73.2–92.3 in · 1,860–2,345 mm81.5 in · 2,070 mmdiffers
Ground clearance declared19.3 in · 490 mm19.9 in · 505 mm—
Turning radius, braked declared12.5 ft · 3.80 m12.8 ft · 3.90 m—
Fuel tank declared121.5 qt · 115.0 L100.4 qt · 95.0 L+21% Ceres 85 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Renault Ceres 85 (A) sources

Source
  • Source: Traktorenlexikon, “Renault Ceres 85”
  • Source: Traktorenlexikon, “Fendt Farmer 108 S/SA”

VALMET 4500 sources

Source
  • Source: Traktorenlexikon, “Valmet 4500”
  • Source: Traktorenlexikon, “Valmet 465”