9 material differences · fewer than 12

Tractor oneRenault 80-32 PX1989–1993No measured PTO figureTractor twoSAME Explorer 75 (DT)1985–1987No measured PTO figure

Which should you choose?

Read our verdict on the 80-32 PX and the Explorer 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Renault 80-32 PX and SAME Explorer 75 (DT), field by field
Field	80-32 PX	Explorer 75 (DT)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	PERKINS LD 4.248	SAME 916.4 A	differs
Displacement declared	4.07 L	3.67 L	+11% 80-32 PX
Maximum torque declared	200 lb·ft · 271 N·m	207 lb·ft · 280 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.4 gpm · 31.9 L/min	9.5 gpm · 36.0 L/min	+13% Explorer 75 (DT)
Pressure declared	—	1,740 psi · 120 bar	—
Three-point lift, at the coupling points declared	8,433 lb · 3,825 kg	7,606 lb · 3,450 kg	+11% 80-32 PX
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,099 lb · 3,220 kg	6,614 lb · 3,000 kg	+7% 80-32 PX
Wheelbase declared	94.1 in · 2,390 mm	95.1 in · 2,415 mm	—
Length declared	152.4 in · 3,870 mm	145.2 in · 3,687 mm	—
Width declared	76.0–87.8 in · 1,930–2,229 mm	73.6–101.2 in · 1,870–2,570 mm	differs
Height, over the cab declared	99.2 in · 2,520 mm	102.1 in · 2,593 mm	—
Ground clearance declared	19.7 in · 500 mm	20.5 in · 520 mm	—
Turning radius, braked declared	13.3 ft · 4.05 m	9.6 ft · 2.94 m	+38% 80-32 PX
Fuel tank declared	121.5 qt · 115.0 L	116.2 qt · 110.0 L	—

Source

Source