10 material differences · fewer than 12
Tractor oneRenault 80-14 F1986–1999No measured PTO figureTractor twoSAME Explorer 75 (DT)1985–1987No measured PTO figure
Which should you choose?
Read our verdict on the 80-14 F and the Explorer 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 80-14 F | Explorer 75 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.0 hp | 74.0 hp | — |
| Engine declared | KLÖCKNER-HUMBOLDT-DEUTZ F4L 913 | SAME 916.4 A | differs |
| Displacement declared | 4.09 L | 3.67 L | +11% 80-14 F |
| Maximum torque declared | 187 lb·ft · 253 N·m | 207 lb·ft · 280 N·m | +11% Explorer 75 (DT) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 11.4 gpm · 43.2 L/min | 9.5 gpm · 36.0 L/min | +20% 80-14 F |
| Pressure declared | — | 1,740 psi · 120 bar | — |
| Three-point lift, at the coupling points declared | 7,738 lb · 3,510 kg | 7,606 lb · 3,450 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,696 lb · 2,130 kg | 6,614 lb · 3,000 kg | +41% Explorer 75 (DT) |
| Wheelbase declared | 81.7 in · 2,075 mm | 95.1 in · 2,415 mm | +16% Explorer 75 (DT) |
| Length declared | 137.7 in · 3,498 mm | 145.2 in · 3,687 mm | +5% Explorer 75 (DT) |
| Width declared | 53.0–77.9 in · 1,345–1,978 mm | 73.6–101.2 in · 1,870–2,570 mm | differs |
| Ground clearance declared | 13.6 in · 345 mm | 20.5 in · 520 mm | +51% Explorer 75 (DT) |
| Turning radius, braked declared | — | 9.6 ft · 2.94 m | — |
| Fuel tank declared | 65.5 qt · 62.0 L | 116.2 qt · 110.0 L | +77% Explorer 75 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 80-14 F sources
- Source: Traktorenlexikon, “Renault 80-14 F R3278”
SAME Explorer 75 (DT) sources
- Source: Traktorenlexikon, “SAME Explorer 75”
- Source: Traktorenlexikon, “SAME Explorer 65”