9 material differences · fewer than 12

Tractor oneRenault 80-12 SP1986–1989No measured PTO figureTractor twoSAME Explorer 75 (DT)1985–1987No measured PTO figure

Which should you choose?

Read our verdict on the 80-12 SP and the Explorer 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Renault 80-12 SP and SAME Explorer 75 (DT), field by field
Field	80-12 SP	Explorer 75 (DT)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	PERKINS 4.248	SAME 916.4 A	differs
Displacement declared	4.07 L	3.67 L	+11% 80-12 SP
Maximum torque declared	200 lb·ft · 271 N·m	207 lb·ft · 280 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.4 gpm · 31.9 L/min	9.5 gpm · 36.0 L/min	+13% Explorer 75 (DT)
Pressure declared	—	1,740 psi · 120 bar	—
Three-point lift, at the coupling points declared	10,075 lb · 4,570 kg	7,606 lb · 3,450 kg	+32% 80-12 SP
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,327 lb · 2,870 kg	6,614 lb · 3,000 kg	—
Wheelbase declared	93.3 in · 2,370 mm	95.1 in · 2,415 mm	—
Length declared	152.4 in · 3,870 mm	145.2 in · 3,687 mm	—
Width declared	75.9–87.8 in · 1,929–2,229 mm	73.6–101.2 in · 1,870–2,570 mm	differs
Height, over the cab declared	97.8 in · 2,485 mm	102.1 in · 2,593 mm	—
Ground clearance declared	16.5 in · 420 mm	20.5 in · 520 mm	+24% Explorer 75 (DT)
Turning radius, braked declared	13.3 ft · 4.05 m	9.6 ft · 2.94 m	+38% 80-12 SP
Fuel tank declared	86.6 qt · 82.0 L	116.2 qt · 110.0 L	+34% Explorer 75 (DT)

Source

Source