Renault 68-14 RS or VALMET 700?
Which should you choose?
On performance, every comparable figure that differs favours the VALMET 700: hydraulic flow. On features, the Renault 68-14 RS is ahead on PTO speeds.
- The Renault 68-14 RS suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The VALMET 700 suits loader and hydraulic implement work better on this data: 35% (14.5 L/min / 3.8 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 68-14 RS | 700 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 44.6 kW (59.8 hp)Traktorenlexikon, “Renault 68-14 RA/RS R7722” | 44.5 kW (59.7 hp)Traktorenlexikon, “Valmet 700/II” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 68-14 RS and the 700. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 68-14 RS and the 700. |
| Which pumps more oil for implements? | 41.2 L/min (10.9 gpm)Traktorenlexikon, “Renault 68-14 RA/RS R7722” | 55.7 L/min (14.7 gpm)Traktorenlexikon, “Valmet 700/II” | AheadThe VALMET 700 has 35% more hydraulic flow (14.5 L/min / 3.8 gpm) than the Renault 68-14 RS (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Renault 68-14 RA/RS R7722” | 2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 700/II” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 3,604 kg (7,945 lb)Traktorenlexikon, “Renault 68-14 RA/RS R7722” | 3,210 kg (7,077 lb)Traktorenlexikon, “Valmet 700/II” | Ahead (a fact, not an advantage)The Renault 68-14 RS is 12% heavier (394 kg / 869 lb) than the VALMET 700 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 68-14 RS and the 700. |
| Which has the wider choice of gears? | 12 to 16Traktorenlexikon, “Renault 68-14 RA/RS R7722” | 8 to 16Traktorenlexikon, “Valmet 700/II” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 68-14 RS and the 700. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Renault 68-14 RA/RS R7722” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 700/II” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Renault 68-14 RA/RS R7722” | 540E/540 rpmTraktorenlexikon, “Valmet 700/II” | AheadThe Renault 68-14 RS offers 1000 rpm at the PTO, which the VALMET 700 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Renault 68-14 RA/RS R7722” | independentTraktorenlexikon, “Valmet 700/II” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Renault 68-14 RA/RS R7722” | 4WDTraktorenlexikon, “Valmet 700/II” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1984–1987 | 1997–2002 | Ahead (a fact, not an advantage)The VALMET 700 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 700 has 35% more hydraulic flow (14.5 L/min / 3.8 gpm) than the Renault 68-14 RS (both pump flow, as stated by the source).
- The Renault 68-14 RS is 12% heavier (394 kg / 869 lb) than the VALMET 700 (both unladen weight, as stated by the source).
- The Renault 68-14 RS offers 1000 rpm at the PTO, which the VALMET 700 does not (as stated by the sources).
- The VALMET 700 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources