8 material differences · fewer than 12
Tractor oneRenault 60 Vigneron1968–1977No measured PTO figureTractor twoSOMECA 474 DT/V1978–1985No measured PTO figure
Which should you choose?
Read our verdict on the 60 Vigneron and the 474 DT/V → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 60 Vigneron | 474 DT/V | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 45.5 hp | 45.3 hp | — |
| Engine declared | MWM D 325-3 | FIAT-IVECO 8035.02 | differs |
| Displacement declared | 2.55 L | 2.59 L | — |
| Maximum torque declared | 108 lb·ft · 146 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.4 mph · 20 km/h | +25% 60 Vigneron |
| Clutch declared | Dry Ferodo double clutch | Pedal-operated dry double clutch with 225.0 mm disc diameter | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.4 gpm · 20.3 L/min | 9.5 gpm · 36.0 L/min | +77% 474 DT/V |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,373 lb · 1,530 kg | 3,649 lb · 1,655 kg | +8% 474 DT/V |
| Wheelbase declared | 72.0 in · 1,830 mm | 73.6 in · 1,870 mm | — |
| Length declared | 123.6 in · 3,140 mm | 125.2 in · 3,180 mm | — |
| Width declared | 33.9–59.8 in · 860–1,520 mm | 44.9 in · 1,140 mm | differs |
| Ground clearance declared | 13.8 in · 350 mm | 6.3 in · 160 mm | +119% 60 Vigneron |
| Turning radius, braked declared | 8.4 ft · 2.57 m | — | — |
| Fuel tank declared | 54.9 qt · 52.0 L | 44.4 qt · 42.0 L | +24% 60 Vigneron |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 60 Vigneron sources
- Source: Traktorenlexikon, “Renault 60 R7253”
SOMECA 474 DT/V sources
- Source: Traktorenlexikon, “Someca 474 V”
- Source: Traktorenlexikon, “Someca 440”