9 material differences · fewer than 12
Tractor oneRenault 581968–1969No measured PTO figureTractor twoSOMECA 415 (DT)1965–1968No measured PTO figure
Which should you choose?
Read our verdict on the 58 and the 415 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 58 | 415 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | RENAULT 671/9 | O.M.-FIAT 615.000 | differs |
| Displacement declared | 2.14 L | 2.27 L | +6% 415 (DT) |
| Maximum torque declared | — | 101 lb·ft · 137 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Two-stage pedal operated dry FERODO double clutch | Pedal operated dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.8 gpm · 18.0 L/min | — |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,123 lb · 1,870 kg | 3,505 lb · 1,590 kg | +18% 58 |
| Wheelbase declared | 76.0 in · 1,930 mm | 75.8 in · 1,925 mm | — |
| Length declared | 128.0 in · 3,250 mm | 119.7 in · 3,040 mm | +7% 58 |
| Width declared | 59.1–82.7 in · 1,500–2,100 mm | 64.0–90.6 in · 1,625–2,300 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 18.9 in · 480 mm | +23% 415 (DT) |
| Turning radius, braked declared | 9.8 ft · 3.00 m | 10.4 ft · 3.18 m | +6% 415 (DT) |
| Fuel tank declared | 58.1 qt · 55.0 L | 51.8 qt · 49.0 L | +12% 58 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 58 sources
Source
- Source: Traktorenlexikon, “Renault 58 R7291”
- Source: Traktorenlexikon, “Renault N, E, V31 R3051”
SOMECA 415 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 415”
- Source: Traktorenlexikon, “Someca SOM 35”