Renault 58-12 MX or VALMET 255 (255-4)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 58-12 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 255 (255-4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Renault 58-12 MX suits loader and hydraulic implement work better on this data: 11% (290 kg / 639 lb) more three-point lift.
- The VALMET 255 (255-4) suits heavy draft work (ploughing, cultivating) better on this data: 10% (265 kg / 584 lb) heavier and four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 58-12 MX | 255 (255-4) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 39.7 kW (53.2 hp)Traktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | 39 kW (52 hp)Traktorenlexikon, “Valmet 255” | Not comparableNot comparable on power at the PTO shaft: the 58-12 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 255 (255-4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 58-12 MX and the 255 (255-4). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 58-12 MX and the 255 (255-4). |
| Which pumps more oil for implements? | — | 39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 255” | No figureNo call on hydraulic flow: no figure on record for the 58-12 MX. |
| Which lifts more on the three-point hitch? | 2,870 kg (6,327 lb)Traktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | 2,580 kg (5,688 lb)Traktorenlexikon, “Valmet 255” | AheadThe Renault 58-12 MX has 11% more lift (290 kg / 639 lb) than the VALMET 255 (255-4) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,555 kg (5,633 lb)Traktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | 2,820 kg (6,217 lb)Traktorenlexikon, “Valmet 255” | Ahead (a fact, not an advantage)The VALMET 255 (255-4) is 10% heavier (265 kg / 584 lb) than the Renault 58-12 MX (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,375 kg (9,645 lb)Traktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | — | No figureNo call on maximum permissible mass: no figure on record for the 255 (255-4). |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | 8 to 12Traktorenlexikon, “Valmet 255” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 58-12 MX and the 255 (255-4). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 255” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | 540/1000 rpmTraktorenlexikon, “Valmet 255” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 255” | No figureNo call on PTO independence: not stated for the 58-12 MX. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Renault 58-32 ME/MA/MS/MX R3111” | 2WD / 4WDTraktorenlexikon, “Valmet 255” | AheadThe VALMET 255 (255-4) is available with four-wheel drive; the Renault 58-12 MX is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1989–1993 | 1992–1994 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Renault 58-12 MX has 11% more lift (290 kg / 639 lb) than the VALMET 255 (255-4) (both lift at the hitch ends, as stated by the source).
- The VALMET 255 (255-4) is 10% heavier (265 kg / 584 lb) than the Renault 58-12 MX (both unladen weight, as stated by the source).
- The VALMET 255 (255-4) is available with four-wheel drive; the Renault 58-12 MX is two-wheel drive (as stated by the sources).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 58-12 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 255 (255-4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources