5 material differences · fewer than 12
Tractor oneRenault R-561967–1973No measured PTO figureTractor twoSAME Atlanta-V (DT)1965–1968No measured PTO figure
Which should you choose?
Read our verdict on the R-56 and the Atlanta-V (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | R-56 | Atlanta-V (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 41.4 hp | 41.4 hp | — |
| Engine declared | — | SAME 954/V | — |
| Displacement declared | — | 3.40 L | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Two-stage pedal operated dry Ferodo double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 3.2 gpm · 12.0 L/min | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,189 lb · 1,900 kg | 3,483 lb · 1,580 kg | +20% R-56 |
| Wheelbase declared | 76.0 in · 1,930 mm | 72.0 in · 1,830 mm | +5% R-56 |
| Length declared | 128.0 in · 3,250 mm | 109.4 in · 2,780 mm | +17% R-56 |
| Width declared | 59.1–82.7 in · 1,500–2,100 mm | 58.7 in · 1,490 mm | differs |
| Height, over the steering wheel declared | 63.8 in · 1,620 mm | 57.5 in · 1,460 mm | +11% R-56 |
| Ground clearance declared | 16.9 in · 430 mm | 16.9 in · 430 mm | — |
| Turning radius, braked declared | 10.8 ft · 3.29 m | — | — |
| Fuel tank declared | 58.1 qt · 55.0 L | — | — |
Renault R-56 sources
Source
- Source: Traktorenlexikon, “Renault 56 R7251”
SAME Atlanta-V (DT) sources
Source
- Source: Traktorenlexikon, “SAME Atlanta V (DT)”
- Source: Traktorenlexikon, “SAME Atlanta 45 (DT)”