Renault 461 (S) or Renault 80?

Which should you choose?

On performance, every comparable figure that differs favours the Renault 461 (S): three-point lift.

  • The Renault 461 (S) suits loader and hydraulic implement work better on this data: 10% (190 kg / 419 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Renault 461 (S) and Renault 80, with the call on each
Question461 (S)80Call
Which puts more power through the PTO shaft?31.9 kW (42.8 hp)Traktorenlexikon, “Renault 461 R7441”32.2 kW (43.2 hp)Traktorenlexikon, “Renault 80 R7282”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 461 (S) and the 80.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 461 (S) and the 80.
Which pumps more oil for implements?24.5 L/min (6.5 gpm)Traktorenlexikon, “Renault 461 R7441”23.2 L/min (6.1 gpm)Traktorenlexikon, “Renault 80 R7282”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,040 kg (4,497 lb)Traktorenlexikon, “Renault 461 R7441”1,850 kg (4,079 lb)Traktorenlexikon, “Renault 80 R7282”AheadThe Renault 461 (S) has 10% more lift (190 kg / 419 lb) than the Renault 80 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,575 kg (5,677 lb)Traktorenlexikon, “Renault 461 R7441”1,645 kg (3,627 lb)Traktorenlexikon, “Renault 80 R7282”Ahead (a fact, not an advantage)The Renault 461 (S) is 57% heavier (930 kg / 2,050 lb) than the Renault 80 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 461 (S) and the 80.
Which has the wider choice of gears?10Traktorenlexikon, “Renault 461 R7441”8Traktorenlexikon, “Renault 80 R7282”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?YesTraktorenlexikon, “Renault 461 R7441”No figureNo call on a creeper range: not stated for the 80.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Renault 461 R7441”25 km/h (15.5 mph)Traktorenlexikon, “Renault 80 R7282”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Renault 461 R7441”540 rpmTraktorenlexikon, “Renault 80 R7282”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Renault 461 R7441”independentTraktorenlexikon, “Renault 80 R7282”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Renault 461 R7441”2WDTraktorenlexikon, “Renault 80 R7282”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1972–19871968–1977EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault 461 (S) has 10% more lift (190 kg / 419 lb) than the Renault 80 (both lift at the hitch ends, as stated by the source).
  • The Renault 461 (S) is 57% heavier (930 kg / 2,050 lb) than the Renault 80 (both unladen weight, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources