10 material differences · fewer than 12
Tractor oneRenault 351 M1977–1981No measured PTO figureTractor twoZETOR 3511/35451967–1972No measured PTO figure
Which should you choose?
Read our verdict on the 351 M and the 3511/3545 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 351 M | 3511/3545 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.6 hp | 34.5 hp | — |
| Engine declared | MWM D 327-2 | ZETOR Z-3001 | differs |
| Displacement declared | 1.88 L | 2.34 L | +24% 3511/3545 |
| Maximum torque declared | 86 lb·ft · 117 N·m | 98 lb·ft · 133 N·m | +14% 3511/3545 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry VERTO double clutch | Foot-operated dry two-stage double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.5 gpm · 24.6 L/min | 5.3 gpm · 20.0 L/min | +23% 351 M |
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,321 lb · 1,960 kg | 3,373 lb · 1,530 kg | +28% 351 M |
| Wheelbase declared | 73.0 in · 1,854 mm | 75.5 in · 1,918 mm | — |
| Length declared | 125.4 in · 3,184 mm | 128.6 in · 3,266 mm | — |
| Width declared | 66.1–83.9 in · 1,680–2,130 mm | 65.0 in · 1,652 mm | differs |
| Ground clearance declared | 14.6 in · 370 mm | 13.8 in · 350 mm | +6% 351 M |
| Turning radius, braked declared | 10.4 ft · 3.16 m | 9.6 ft · 2.93 m | +8% 351 M |
| Fuel tank declared | 50.7 qt · 48.0 L | 40.2 qt · 38.0 L | +26% 351 M |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 351 M sources
- Source: Traktorenlexikon, “Renault 351 M / R 7411”
- Source: Traktorenlexikon, “Renault 50S R7365”
ZETOR 3511/3545 sources
- Source: Traktorenlexikon, “Zetor 3511”