Renault 155-54 TX vs SOMECA 1300 Super (DT)

11 material differences · fewer than 12

Tractor one

1989–1990

No measured PTO figure

Tractor two

1978–1981

No measured PTO figure

Which should you choose?

Read our verdict on the 155-54 TX and the 1300 Super (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Renault 155-54 TX and SOMECA 1300 Super (DT), field by field
Field	155-54 TX	1300 Super (DT)	Gap
Engine
Engine power, claimed claimed	143.1 hp	143.0 hp	—
Engine declared	MWM TD 226 B-6	O.M.-FIAT CP-3/100 Var.17	differs
Displacement declared	6.23 L	7.41 L	+19% 1300 Super (DT)
Maximum torque declared	389 lb·ft · 528 N·m	348 lb·ft · 472 N·m	+12% 155-54 TX
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry LuK double clutch type DT 355/330	Pedal-operated dry Ferodo single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	11.4 gpm · 43.1 L/min	12.0 gpm · 45.5 L/min	+6% 1300 Super (DT)
Pressure declared	—	2,901–3,336 psi · 200–230 bar	—
Three-point lift at ends declared	19,511 lb · 8,850 kg	9,852 lb · 4,469 kg	+98% 155-54 TX
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,881 lb · 6,750 kg	11,155 lb · 5,060 kg	+33% 155-54 TX
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	107.9 in · 2,740 mm	108.3 in · 2,750 mm	—
Length declared	181.2 in · 4,603 mm	187.8 in · 4,770 mm	—
Width declared	83.3 in · 2,116 mm	85.4 in · 2,170 mm	—
Height declared	117.4 in · 2,983 mm	112.2 in · 2,850 mm	—
Ground clearance declared	19.0 in · 482 mm	26.0 in · 660 mm	+37% 1300 Super (DT)
Turning radius, braked declared	16.4 ft · 5.00 m	14.4 ft · 4.40 m	+14% 155-54 TX
Fuel tank declared	158.5 qt · 150.0 L	216.6 qt · 205.0 L	+37% 1300 Super (DT)

Source

Source